Aktives Super Slim 2.
LS 195 2
LS 195 3
LS 195 4
LS 195 5
LS 195 6
LS 195 7
LS 195 8
LS 195 9
LS 195 10
LS 195 11
LS 195 12
LS 195 13
LS 195 14
LS 195 15
LS 195 16
LS 195 TV Woofer Rear-L Front-L Center Rear-R Front-R Video DVD Player 17
LS 195 18
LS 195 CD TV C1 19 C2 OP
LS 195 20
LS 195 21
LS 195 22
LS 195 23
LS 195 24
LS 195 25
LS 195 26
LS 195 The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If so, simply replug and power on reset the product to resume the unit operation by following the instruction manual. In case the function could not resume, please use the product in other location, or ask a service.
LS 195 Conformity Model number: LS 195 Description: Active Super Slim 2.1 System with Subwoofer Brand name: Blaupunkt Responsible party: M3 Electronic GmbH Gutenbergstrasse 5, D-65830 Kriftel. Germany Hereby, Blaupunkt Competence Center Audio M3 Electronic GmbH, declares that this Class 1 equipment is in compliance with the essential requirement and other relevant provisions of Directive 1999/5/EC. Letter of conformity can be obtained from info@m3-electronic.de. Safety Instructions 1.
LS 195 12. ESD WARNING – the display does not function properly or not reaction to operation of any the control may due to the electrostatic discharge. Switch off and unplug the set. Reconnect after a few seconds. 13. DAMAGE REQUIRING SERVICE – the appliance should be serviced by qualified service personal when: a. the power-supply cord or plug has been damaged. b. Objects have fallen into, or liquid has been spilled into the appliance enclosure. c. The appliance has been exposed to rain. d.
LS 195 26. Ensure a minimum distance of 5cm around the apparatus for sufficient ventilation. 27. The ventilation should not be impeded by covering the ventilation opening with items such as newspapers, table-cloths, curtains, etc. 28. The batteries should be drawn to the environmental aspects of batter y disposal. Front panel - controls and functions 1. STANDBY: Power Standby Button. 2. INPUT:Input Selection Button. 3. STANDBY: Power Standby Indicator. 4. LED Display. 5. Remote Sensor. 6.
LS 195 Rear panel - controls and functions 1. Optical Input. 2. Coaxial 1 Input. 3. TV Stereo Left Audio Input. 4. CD Stereo Left Audio Input. 5. Power On/Off Switch. 6. AC Power Cord. 7. Speaker Output. 8. Coaxial 2 Input. 9. TV Stereo Right Audio Input. Notice: When DVD player is working and PCM mode is chosen, the device works; otherwise, the devise cannot recognize the source. 10. CD Stereo Right Audio Input. 11. Speaker Input.
LS 195 System connection instructions Video In To Stereo Output TV RCA Cable Woofer Rear-L Front-L Center Rear-R Front-R Video Out Video Audio Out DVD Player 32
LS 195 Remote control 1. STANDBY: Power Standby. 2. MUSIC: Music Mode Selection. 3. NORMAL: Normal Mode Selection. 4. VOL-: Volume Down Button. 5. BASS-: Bass Down Button. 6. TREBLE-: Treble Down Button. 7. INPUT: Input Selection Button . CD TV C1 C2 OP 8. MUTE: Mute Function Button. 9. RESET: Location Retrieval Button. 10. MOVIE: Movie Mode Selection. 11. VOL+: Volume Up Button. 12. BASS+: Bass Up Button. 13. TREBLE+: Treble Up Button.
LS 195 Remote control battery replacement 1. Please remember to replace the battery when can not workable or weakness function. 2. Use only CR2025 3V lithium batteries 3.Bear in mind that lighting & other room conditions, in addition to battery age, can affect the operating range of an infrared remote control. 4. Battery disposal: Batteries and rechargeable batteries are prohibited to dispose into household waste.
LS 195 Operation A.Switch On/Off the Product 1.Before turn on the system, please connect it according to the System Connection Instruction. 2.Plug on and connect AC power supply with this product. (Caution: Power source must be consistent with specification.) 3.Press on the POWER switch button on the Rear Panel of the main unit to switch on the system, the standby indicator will light up. Then press the STANDBY button on the remote controller to enter the normal status.
LS 195 Specifications 1.Power Supply..........................................................................................................AC 230V/50Hz 2.Total THD 10% Pass Power Output...... ..................................................................................80W 3.Subwoofer Power Output ......................................................................................................40W 4.Soundbar Power Output ...........................................................................
