Instruction Manual 5.1 Channel Cinema System with Remote Wirless and Glossy MODEL:LS 250 Wireless-Rear Speaker Read this manual carefully to get the excellent acoustics from this unit.
SAFETY INFORMATION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED, "DANGEROUS VOLTAGE", WITH IN THE PRODUCTS ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
IMPORTANT SAFEGUARDS SPECIFICATIONS Caution: Please read carefully all the following important safeguards to ensure safe operation. 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Follow Instructions - All operating instructions should be followed. 4.
TROUBLE SHOOTING IMPORTANT SAFEGUARDS 9. Heat - Keep the appliance away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 1. NO OUTPUT (1) Check whether the system is connected correctly. (2) Check whether the Volume is set at minimum. Adjust it accordingly. (3) Check whether the Audio Input is in PLAY mode. 2. NO SOUND FROM FRONT LEFT SPEAKER (1) Check whether the system is connected correctly with the Front Left speaker.
FRONT PANEL - CONTROLS AND FUNCTIONS OPERATING INSTRUCTION G. SURROUND(MODE) DECODER 1 2 3 4 5 6 7 8 Virtual 2.1 ch Virtual 5.1 ch 9 1. Connect and place Center and Rear speakers properly. 2. Press the MODE button on the remote controller to select Surround Decoder for Home Theater system effects. Volume Level H. 5.1 CHANNELS INPUT 1. Connect the system properly. 5.1 Channels audio output must comply with 5.1 channels audio input. 2.
OPERATING INSTRUCTION REAR PANEL - CONTROLS AND FUNCTIONS D. FRONT SPEAKER 1. Press FRONT + button on the remote controller to maximize the Front Speaker output. 2. Press FRONT - button on the remote controller to minimize the Front Speaker output. 16 10 11 12 13 17 18 19 E. CENTER SPEAKER 1. Press CEN+ button on the remote controller to maximize the Center Speaker output. 14 2. Press CEN - button on the remote controller to minimize the Center Speaker output. F. SURROUND SPEAKER POWER 1.
REAR PANEL - CONTROLS AND FUNCTIONS OPERATING INSTRUCTION 10. 5.1CH Rear Right Audio Input. A. Switch On/Off the Product 11. 5.1CH Front Right Audio Input. 1. Before turning on the system, please connect it according to the System Connection Instruction. 12. 5.1CH Front Left Audio Input. 13. 5.1CH Rear Left Audio Input. 14. Speaker Output. FR: Front Right Speaker Output. FL: Front Left Speaker Output. CEN: Center Speaker Output. 15. Power On/Off Switch. 16. 5.1CH Center Audio Input. 17.
SYSTEM CONNECTION INSTRUCTIONS OPERATING INSTRUCTION - CONTROLS AND FUNCTIONS Use the SPEAKER OUTPUT jacks on the rear panel of main unit to connect the surround speakers. FRONT RIGHT SPEAKER FRONT LEFT SPEAKER 28 29 30 31 21 22 23 24 25 26 27 32 33 34 21. INPUT: Input Switch. 22. CEN +: Centre Output Up. 23. FRONT +: Front Balance Output Up. 24. FRONT -: Front Balance Output Down. 25. CEN -: Centre Output Down. 26. SW -: Sw Output Down. 27. VOLUME -: Main Volume Down. 28. MUTE: mute button. 29.
OPERATING INSTRUCTION - CONTROLS AND FUNCTIONS SYSTEM CONNECTION INSTRUCTIONS 1. Before using the remote controller, please insert correct type of batteries into the battery compartment. Subwoofer 2. The remote controller uses 2x1.5V/AAA batteries. 3. Please insert the batteries as indicated below. a/ Remove the battery compartment cover. b/ Insert 2 batteries as per the polarities marked inside the battery compartment.