5.
LS 255 2
LS 255 3
LS 255 4
LS 255 5
LS 255 6
LS 255 7
LS 255 8
LS 255 9
LS 255 10
LS 255 11
LS 255 Virtua12.1ch Virtua15.
LS 255 13
LS 255 10 11 12 13 16 14 AC 250 V 10A POWER 15 AC230V ~ 50Hz ON OFF Wireless-Rear Speaker 14 17
LS 255 15
LS 255 25 26 27 28 18 19 20 21 22 23 24 6CH (5.
LS 255 17
LS 255 18
LS 255 19
LS 255 20
LS 255 TV 21
LS 255 22
LS 255 23
LS 255 24
LS 255 25
LS 255 26
LS 255 27
LS 255 28
LS 255 29
LS 255 30
LS 255
LS 255 32
LS 255 33
LS 255 34
LS 255 Conformity Model number: LS 255 Description: 5.1CH Home Cinema System with Wireless Rear Surround Speakers Brand name: Blaupunkt Responsible party: M3 Electronic GmbH Gutenbergstrasse 5, D-65830 Kriftel. Germany Hereby, Blaupunkt Competence Center Audio M3 Electronic GmbH, declares that this Class 1 equipment is in compliance with the essential requirement and other relevant provisions of Directive 1999/5/EC. Letter of conformity can be obtained from info@m3-electronic.de. Safety Instructions 1.
LS 255 12. ESD WARNING – the display does not function properly or not reaction to operation of any the control may due to the electrostatic discharge. Switch off and unplug the set. Reconnect after a few seconds. 13. DAMAGE REQUIRING SERVICE – the appliance should be serviced by qualified service personal when: a. the power-supply cord or plug has been damaged. b. Objects have fallen into, or liquid has been spilled into the appliance enclosure. c. The appliance has been exposed to rain. d.
LS 255 26. Ensure a minimum distance of 5cm around the apparatus for sufficient ventilation. 27. The ventilation should not be impeded by covering the ventilation opening with items such as newspapers, table-cloths, curtains, etc. 28. The batteries should be drawn to the environmental aspects of batter y disposal. CAUTION This device is with built-in 2.4GHz wireless system. If the working environment is with other working 2.4GHz devices like microwave oven, 2.
LS 255 Front panel - controls and functions Virtua12.1ch Virtua15.1ch Volume Level 1. INPUT: Input source select button. 2. MUTE: Mute function button. 3. MODE: 5.1ch & 2.1ch mode select button. 4. 2.1ch.: 2.1Channel Input Indicator. 5. Remote Sensor. 6. 5.1ch.: 5.1 Channel Input Indicator. 7. Volume +: Volume Up button. 8. Volume -: Volume Down button. 9. LED Display.
LS 255 Rear panel - controls and functions 10 11 12 13 16 14 AC 250 V 10A POWER 15 AC230V ~ 50Hz ON 17 OFF Wireless-Rear Speaker 10. Analog 5.1ch input jack for FR/FL/SR/SL/CEN/SW connection. 11. Coaxial 1 input jack. 12. Optical input jack. 13. Coaxial 2 input jack. 14. Speaker output jack. FR: for Front Right Speaker connection. FL: for Front Left Speaker connection. CEN: for Center Speaker connection. 15. Power On/Off Switch. 16. Stereo input jack. 17. AC Power Cord.
LS 255 Operating instruction - controls and functions 25 26 27 28 18 19 20 21 22 23 24 29 30 31 18. INPUT: Input Source Selection Button. Recycle selection will be: 6CH (5.1CH) AUX OPT CO1 19. CEN +: increase the volume for Center Speaker. 20. FRONT +: increase the volume for Front Speaker. 21. FRONT -: decrease the volume for Front Speaker. 22. CEN -: decrease the volume for Center Speaker.. 23. SW -: decrease the volume for Subwoofer. 24. VOLUME -: decrease the volume for System. 25.
LS 255 Operating instruction - controls and functions 1. Before using the remote controller, please insert correct type of batteries into the battery compartment. 2. The remote controller uses 2x1.5V/AAA batteries. 3. Please insert the batteries indicated as below. a. Push and open the battery compartment cover. b. Insert 2 batteries as per the polarities marked inside of the battery compartment. c. Re-locate the battery cover. 4.
LS 255 System connection instructions Sub Woofer/DVD Player/TV Analogue audio connect to Connect to DVD player Coaxial cable Optical cable TV 42
LS 255 System connection instructions Using the speaker cable connect FL/FR/CEN speaker with subwoofer as below. Front right speaker Front left speaker Note: Be sure to match the speaker cable to the appropriate jacks on components: "White" to "Red", and "Black" to "Black".
LS 255 Speaker Assembly Drawing Tower speaker Chassis Spacer Screws 44
LS 255 Operating instruction A. Switch On/Off and pairing the product 1. Before turning on the system, please connect it according to the System Connection Instruction. 2. Connect AC power supply with this product. (Caution: Power source must be consistent with this product.) 3. Press on the power switch button on the Rear Panel of the main unit to power on the system, Press it once again to power off the unit. 4.
LS 255 H. 5.1 Channels Input 1. Connect the system properly. When you have 5.1ch audio input connected, it will be 5.1ch audio output. Meanwhile, when you have connected AUX(2.0ch), Opt, Coa1, Coa2 input, you can optional select play in 5.1ch & 2.1ch output. 2. Press INPUT button on the remote controller to shift the status from audio input to 5.1ch channels input. 3.
LS 255 5. No sound from rear speaker (1) Check whether the system is connected correctly with the Rear speaker. (2) Check whether the system is connected correctly with the audio source. (3) Check whether 2.1ch is selected as audio output. (4) Check whether 5.1ch is selected as audio output. Specifications 1. Power Supply........................................................................................................AC 230V/50Hz 2. Total Power Output..................................................
LS 255 This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product. All rights reserved by Blaupunkt Competence Center Audio M3 Electronic GmbH.
