Radio / CD Essen CD33 Lausanne CD33 Madeira CD33 Operating instructions http://www.blaupunkt.
Open here 2
11 SVENSKA NEDERLANDS 4 10 5 9 8 ESPAÑOL 3 PORTUGUÊS 12 2 DANSK 1 ITALIANO 6 7 3 FRANÇAIS ENGLISH DEUTSCH
ENGLISH FRANÇAIS ITALIANO NEDERLANDS 8 < SVENSKA 7 : ; Short press: AUDIO button, to adjust the bass, treble, balance and fader settings. button, to display Long press: the time. Keys 1 - 6. Short press: TRAF button to switch traffic information standby on/off. Long press: RDS button, to switch the RDS feature on/off. Short press: BND button, to select the FM memory banks and MW/LW wavebands (MW and LW not on the Essen CD33), and to select radio mode as the source.
CONTENTS Notes and accessories .......... 27 CD mode ................................ 38 Road safety ................................... 27 Installation ..................................... 27 Accessories .................................. 27 Switching to CD mode .................. 38 Selecting tracks ............................ 38 Quick track selection ..................... 38 Fast searching (audible) ................ 38 Random play (MIX) ........................ 38 Scanning tracks (SCAN) ............
ENGLISH FRANÇAIS Road safety has absolute priority. Only operate your car radio if the road and traffic conditions allow you to do so. Familiarise yourself with the unit before setting off on your journey. You should always be able to hear police, fire and ambulance sirens from afar. For this reason, set the volume of whatever you are listening to at a reasonable level.
NOTES AND ACCESSORIES CD changer You can connect the following Blaupunkt CD changers: CDC A 02, CDC A 06, CDC A 08, CDC A 072 and IDC A 09. You can also connect the CDC A 05 and CDC A 071 CD changers by using an adapter cable (Blaupunkt no. 7 607 889 093). Compact Drive MP3 As an alternative to a CD changer, you can connect a Compact Drive MP3 to access MP3 music tracks.
right into the unit’s guide. ➮ Press the left-hand edge of the control panel into the unit until it clicks into place. ➮ To do so, press button 2. Note: ● To protect the vehicle battery, the unit will switch off automatically after one hour if the ignition is off. Switching on/off using the removable control panel ➮ Remove the control panel. The unit switches off. ➮ Attach the control panel again. The unit switches on.
SWITCHING ON/OFF ADJUSTING THE VOLUME Switching on by inserting a CD If the unit is switched off and there is no CD inserted in the drive, Adjusting the volume ➮ Gently insert the CD with the printed side uppermost into the drive until you feel some resistance. The CD will be drawn automatically into the drive. You must not hinder or assist the drive as it draws in the CD. The unit switches on. CD playback begins. The system volume can be adjusted in steps from 0 (off) to 66 (maximum).
➮ Briefly press button 2. “MUTE” appears in the display. Setting the mute level You can set the unit’s mute volume level. ➮ Press the MENU button 7. ➮ Keep pressing the or button 5 until “MUTE LVL” appears in the display. ➮ Press the MENU button 7. ➮ Keep pressing the or button 5 until “BEEP” appears in the display. and buttons 5 to switch between the options. “OFF” means beep off, “ON” means the beep is switched on.
RADIO MODE Radio mode Switching REG on/off This unit is equipped with an RDS radio receiver. Many of the receivable FM stations transmit a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears in the display as soon as it is received. ➮ Press the MENU button 7. ➮ Keep pressing the or button Switching to radio mode If you are in CD, CD changer/Compact Drive MP3 or AUX mode, ➮ press the BND•TS button <.
button 9. Setting the sensitivity station seek tuning You can configure the radio to only tune into stations with a strong reception or to also tune into those with a weak reception. ➮ Press the MENU button 7. ➮ Keep pressing the or button 5 until “SENS” appears in the display. ➮ Press the or button 5. The display shows the currently set value for sensitivity. “SENS HI6” means that the tuner is highly sensitive. “SENS LO1” means it is set to the lowest sensitivity setting.
RADIO MODE Storing stations Storing stations manually ➮ Select the required FM1 / FM2 / FMT memory bank or MW / LW waveband (MW and LW are not available on the Essen CD33). ➮ Tune into the station. ➮ Press one of the station buttons 1 6 : for longer than one second to store the station to that button. Storing stations automatically (Travelstore) You can automatically store the six stations with the strongest reception in the region (only for FM). The stations are stored in the FMT memory bank.
➮ Press the or button 5. The current programme type appears in the display. ➮ If you want to select another pro- ENGLISH FRANÇAIS ITALIANO Selecting a programme type and starting seek tuning NEDERLANDS Note: ● If no station is found that corresponds to the selected programme type, you will hear a beep and “NO PTY” appears briefly in the display. The station that was listened to last will then be tuned into again.
RADIO MODE Storing a programme type on a station button ➮ Select a programme type using the or button 5. ➮ Press and hold the required button 1 - 6 : until you hear a beep. The programme type is now stored on the station button 1 - 6 : that you selected. Selecting the PTY language You set the language in which the programme type is displayed. ➮ Press the MENU button 7. ➮ Keep pressing the or button 5 until “PTY LANG” appears in the display. or button 5 to switch between German, English and French.
TRAFFIC INFORMATION RECEPTION ing the and DEUTSCH ENGLISH buttons 5. NEDERLANDS ITALIANO FRANÇAIS ➮ Press the MENU button 7. SVENSKA Note: You will hear a warning sound ● if you leave the reception area of a traffic information station that you are currently listening to. ● if, while listening to a CD, you leave the reception area of a traffic information station that you are tuned into and the subsequent automatic search cannot find a new traffic information station.
CD MODE CD mode You can use this unit to play audio CDs, CD-Rs and CD-RWs with a diameter of 12 cm. Risk of damage to the CD drive! CD singles with a diameter of 8 cm and contoured CDs (shape CDs) are not suitable for playback in this unit. We accept no liability for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. Switching to CD mode ● If there is no CD inserted in the drive.
CD MODE Stopping SCAN and continuing playback To stop scanning, ➮ briefly press the MENU button 7. The current track will then continue to be played. Repeating tracks (REPEAT) If you want to repeat a track, ➮ press button 4 (RPT) :. DEUTSCH ENGLISH ➮ Press button 3 ( ) : while in pause mode. Playback is continued. Changing the display To switch between the track number display and the track number / playing time display, ➮ Press the MENU button 7.
CD CHANGER MODE CD changer mode Fast searching (audible) Note: ● Information on handling CDs, inserting CDs and operating the CD changer can be found in the operating instructions supplied with your CD changer. To fast search backwards or forwards, Switching to CD changer mode ➮ Keep pressing the SRC button 6 until “CHANGER” appears in the display. Playback begins with the first CD that the CD changer detects. buttons 5 pressed until fast searching backwards / forwards begins.
➮ keep pressing button 4 (RPT) : again. The currently scanned track will then continue to be played. ➮ briefly press button 5 (MIX) :. Note: ● You can set the scantime. For further details, read the section entitled “Setting the scantime” in the “Radio mode” chapter. “MIX CD” appears briefly and MIX lights up in the display. To play the tracks on all inserted CDs in random order, “PAUSE” appears in the display. ➮ press button 5 (MIX) : again.
CLOCK - TIME To display the time, or button 5 to switch between the modes. When you have finished making your changes, ➮ Keep the AUDIO ( ) button 9 ➮ press the MENU button 7. ➮ Press the CLOCK - Time Displaying the time pressed until the time appears in the display. Setting the time ➮ Press the MENU button 7. ➮ Keep pressing the or button 5 until “CLOCKSET” appears in the display. ➮ Press the button 5. The time appears in the display. The minutes flash and can be adjusted.
or button 5 to adjust the bass. When you have finished making your changes, ➮ Press the or button 5 to adjust the balance (right/left). When you have finished making your changes, ➮ Press the ➮ press the AUDIO button 9. ➮ press the AUDIO button 9. Adjusting the fader settings Adjusting the treble settings To adjust the front/back volume distribution (fader), To adjust the TREBLE, ➮ press the AUDIO button 9. ➮ Keep pressing the or button 5 until “TREB” appears in the display.
X-BASS LEVEL DISPLAY X-BASS Setting the level display The X-BASS feature can be used to boost the bass at low volume levels. The level display briefly provides a symbolic display of the volume and the sound control settings whilst you are adjusting them. When you are not changing any settings, the level display can also be used to display the car radio’s output level (“PEAK ON”). You can also choose to deactivate the level display (“PEAK OFF”).
➮ Press the MENU button 7. Note: The AUX input can now be selected by pressing the SRC button 6. Frequency ranges: FM: 87.5 – 108 MHz MW: 531 – 1,602 kHz LW: 153 – 279 kHz MW and LW are not available on the Essen CD33. FM frequency response: 35 - 16,000 Hz CD Frequency response: 20 - 20,000 Hz Pre-amp out 4 channels: 3V ESPAÑOL or button 5 to switch AUX on/off. ➮ Press the Tuner Input sensitivity AUX input: 2 V / 6 kOhm PORTUGUÊS 5 until “AUX OFF” or “AUX ON” appears in the display.
Service-Nummern / Service numbers / Numéros du service aprèsvente / Numeri del servizio di assistenza / Servicenummers / Telefonnummer för service / Números de servicio / Número de serviço / Servicenumre Country: Phone: Fax: WWW: http://www.blaupunkt.