Operation Manual

MC CD 40
Trouble shooting
PROBLEM
CAUSE SOLUTION
No sound
Static Sound
Sound is distored
Volume not turned up
Signal reception too low
Volume is too high
Adjust the main volume knob
Adjust the antenna or move
the unit to a stronger signal
location
Desired station not found
Weak signal
Use the Manual Tune function
The display is blank
This may occur if the broadcaster
changes the lable of a service or
removes a lable while tuned.
The radio will try to retune per
formance a scan.
I can hear a burbling noise
on some stations
weak signal Try re-positioning the aerial
53