Operating instructions Memphis DJ Memphis DJ (Canberra)
ENGLISH 3 4 6 5 QuickOut a FRANÇAIS 2 12 11 10 9 8 7 b QuickOut PORTUGUES ESPAGÑOL 19 18 17 16 15 14 13 SVENSKA NEDERLAND ITALIANO 1 3 Memphis DJ (Canberra)
Table of Contents Short description ......................... 17 Important information .................. 20 What you must know! ............................ 20 Traffic safety ......................................... 20 QuickOut ............................................... 20 Installation/hook-up ............................... 20 Anti-theft coding .......................... 21 Wrong code number entered ................ 21 First-time operation and restart following interruption of power supply ........
2 Rocker switch Changing the track Press simultaneously TR1-PLAY or TR2-PLAY in the display Off Seek tuning Volume Scan: Press for 1 second Extra functions: DSC mode: Select and program DSC settings. Coding: Enter code and confirm with 3 Eject tape . Press ITALIANO 6 Display Radio: Waveband Frequency Memory bank Preset button Seek tuning sensitivity Stereo PORTUGUES 4 Cassette slot Insert tape (side A or 1 facing up, the open side facing to the right).
Cassette: Side 1 or 2 Repeat or skip titles Metal/CrO2 Dolby Radio reproduction during rapid tape run CD changer (option): Title no. CD no. 7 1, 2, 3, 4, 5, 6 - preset buttons You can store 6 stations on each FM memory bank (I, II, III and T) and another 6 stations on MW and LW each. To store a station: Press button during radio operation and hold it down until the radio resumes play again. To recall a station: Select a waveband.
AUD Treble + + Bass Bass Treble DEUTSCH ENGLISH Balance right The last setting will be stored automatically. If the setting remains unchanged within 8 seconds, the display will shift back to the previous condition. A DSC (Direct Software Control) Use the DSC function to adjust a number of programmable default settings to your personal needs. See “DSC programming” for more details. B SRC (Source) To select between the connected audio sources, e.g. cassette, radio, or CD changer (option).
Important information What you must know! QuickOut Before starting to use your new car radio, you should carefully read through the information on “Traffic safety” and “Anti-theft coding”. With the QuickOut handle you can easily pull your radio out of the installation compartment and take it along with you. The preset stations remain stored for a longer time. To take out the radio, • press knob (a), raise the handle (b) and pull the unit out.
• Briefly press preset button 1 7, “0000” will appear on the display. • Enter the code number given in the Blaupunkt car radio passport: Example: the code number is 2521. - Press preset button 1 twice, “2000” appears on the display. - Press preset button 2 five times, “2500” appears on the display. - Press preset button 3 twice, “2520” appears on the display. - Press preset button 4 once, “2521” appears on the display. Switching the code system off • Turn off the radio.
Radio operation Switching the code system on again To re-activate the anti-theft coding system: • Turn off the radio. • Simultaneously press preset buttons 1 and 4 and hold them down. • Turn on the set again. “CODE” briefly appears on the display before the set is switched on. • Release preset buttons 1 and 4 again. The anti-theft coding system is now activated. Whenever the set is turned on now, “CODE” will always appear briefly on the display.
Storing stations Using the preset buttons 1, 2, 3, 4, 5, 6 you can store six stations on each FM memory bank (I, II, III, T). On MW and LW, you can store six stations each. FRANÇAIS You can recall any stored station by pressing the corresponding preset button. • Use the FM•T or M•L button to select a waveband. Select the desired memory bank to recall FM presets. For this purpose, press FM•T until the desired memory bank is indicated on the display. • Briefly press the corresponding preset button.
Tape operation Sampling stored stations briefly with Preset Scan Sampling stations briefly with Radio Scan You can briefly sample all preset stations of a memory bank using the Preset Scan function. On FM, you can let the system sample the stations stored on the Travelstore level or on the three other memory banks. • Select a waveband. This function allows you to sample all stations of the adjusted waveband for approximately 8 seconds each. To activate Scan: • press knob 1 for approximately 1 second.
DEUTSCH With this set you can play cassettes recorded with or without Dolby-B noise reduction. Cassettes recorded with Dolby NR* distinguish by their reduced background noise and the improved dynamic characteristics. To switch Dolby on/off: is indi• press . When Dolby is on, cated on the display. Fast rewind • Press FR (fast rewind). When the tape has been completely rewound, the set will start playing the same track again. To stop fast rewind: • press FF.
DSC programming Care of your audio equipment Fully depress button the tape is fast forwarded to the next title. Fully depress button the tape is rewound to the beginning of the currently played title, when this title has already been played for more than 8 seconds. If not, the tape will be rewound to the beginning of the previous title. Listening to the radio during fast winding with RM (Radio Monitor) When the tape is fast forwarded or rewound, the radio is normally muted.
LOUD 0 - no boost LOUD 6 - strong boost BEEP Acknowledgement tone for functions requiring a push of more than 2 seconds. Adjust the volume of that tone between 0 and 9 (0 = OFF). : : : : : : 1 1 orange 4 4 2 with SRC on the car radio It is necessary that the changer is fitted with a magazine. Use the SRC button to switch between the connected audio sources (radio - changer cassette). Press SRC until the changer functions appear on the display, e.g. D1 - TR 01 D = disk, TR = track (title). Title no.
Appendix Selecting a CD/title with the rocker switch Select title (upwards): press briefly CUE (audible): hold down Select CD (downwards) Select CD (upwards) Restarting a title: press briefly Select title (downwards): briefly press as many times as required REVIEW (audible): hold down The display shows you the current condition. SCAN To briefly sample all CD tracks. To start SCAN: • press the SCAN knob on the car radio for approximately 1 second.
Blaupunkt-Werke GmbH Bosch Gruppe 1/94 16 Memphis DJ (Canberra) KH-C/VKD 3 D94 147 002 PM