Radio / CD München RDM 126 Operating instructions München RDM126 d® 1 03.05.
ENGLISH 17 FRANÇAIS 18 16 15 NEDERLANDS ITALIANO 20 19 14 1 SVENSKA 13 3 4 5 6 7 8 9 10 11 12 PORTUGUÊS ESPAÑOL 2 3 München RDM126 d® 3 03.05.
Switching the audio source ........ 38 Radio operation with RDS ........... 39 REG - regional programme .................. 39 Station tuning ........................................ 39 Automatic tuning / ....................... 39 Manual tuning with << >> .................. 40 Scrolling through the broadcasting networks ................................................ 40 Changing the memory bank ................. 40 Storing stations .....................................
Quick reference 1 Switching on/off with the ON button: Press ON. When switching the set on with the ON button, the KeyCard has to be inserted. The unit will play with the pre-adjusted volume. Switching on/off with the KeyCard: The set has to be turned on via the ON button. Note: Read the information in chapter “KeyCard theft protection system”. Switching on/off via the ignition: When connected correspondingly, the set can also be turned on and off via the vehicle ignition.
DEUTSCH 6 Rocker switch Radio operation Changer operation (optional) Up Down Press once to go back to the beginning of the current title. CD selection Fast advance, audible (CUE). Hold down as long as required. Title selection ITALIANO Up Down Upwards: Press briefly. CUE - fast advance (audible): Keep depressed. Fast reverse, audible (REVIEW). Hold down as long as required. Downwards: Press as many times as required. To restart a title: Press briefly.
7 Display m) PTY n) MIX o) TPM a p) T5 d - Programme type function - CD playback in random order - To select and store CD titles - Track no. 5 is played back e f g hi j k l m b n o 8 KeyCard theft protection system To operate the set it is necessary that the KeyCard is inserted.
MIX OFF The Mix function is deactivated. Press SC/MIX as many times until the desired function briefly appears in the display. CD-Scan Press SC/MIX for approximately two seconds until you hear a beep. “CDC-SCAN” will appear in the display. All CD titles will be scanned briefly. Radio operation CD and CDC operation (optional) Regional function on/off: Press the AF button for approximately two seconds until you hear a beep.
CDC operation (optional) To switch between the name, time (playback time) and number (CD number) display modes: Press AF briefly. > PTY (Programme Type) In the PTY mode, the preset buttons become programme type buttons. With each preset you can select one programme type, such as for example NEWS, SPORT, POP MUSIC, EDUCATE, etc. ? • SRC SRC (source) When having a CD inserted you can switch between the different audio sources radio, CD, and CDC/AUX (if activated).
NEDERLANDS SVENSKA Extra function AUD Loudness: When listening at a low level, the Loudness function will create a more natural sound by emphasising the low frequency range. To switch the Loudness on/off: Press the AUD button for approximately two seconds until you hear a beep. ESPAÑOL Extra function GEO Separate balance and fader settings for traffic messages. See chapter “Adjusting GEO for traffic messages and the warning beep”. The last setting will be stored automatically.
Important notes Precautions Installation Accessories Before starting to use your new car radio, please read the following information carefully. If you would like to install your new car stereo yourself or add other audio components to existing ones, then please read carefully the enclosed instructions on installation and connection. In order to ensure that the set operates properly it is necessary that the positive power supply line is connected via the ignition and the permanent +12 V lead.
• Turn on the set. Introduce the KeyCard into the slot with the contact area showing up (KeyCard tongue sticking out). The car radio is now ready for operation. If a wrong KeyCard is inserted, then “CARD Displaying the radio pass data “Training” a second KeyCard/ Replacing a KeyCard While operating the unit with the first KeyCard, you can “train” a second one to be also used with the set: • Insert the first KeyCard and turn on the set.
Switching the audio source Short Additional Memory (S.A.M.) Optical indication for extra security The second KeyCard available from your specialised dealer offers you the possibility to read out any short information, which will be moved through the display, such as, for example, the phone number of your car dealer or the emergency call number of your automobile association. Please refer to chapter “DSC programming - READ KC”.
In order to switch this function on or off, • press the AF button briefly. While searching for the strongest reception signal, the radio may switch to mute briefly. Automatic tuning REG - regional programme / • Certain radio programmes are split up at times into regional programmes offering local information.
Manual tuning with << >> You can also tune in a station manually. Condition: AF and PTY must be switched off (i.e. the symbols do not light up in the display). If necessary, deactivate these functions: • Press AF or PTY. Manual tuning: • Press << >>; the frequency will change in short intervals in downwards or upwards direction. When holding the right or left part of the rocker switch depressed, the frequency scan is speeded up.
Scanning stored stations with Preset Scan You can have all of the stored stations briefly scanned on all wavebands. To start Preset Scan: • Press SC/MIX for approximately two seconds. All of the stored stations of the adjusted waveband will be scanned one after the other. The memory bank and preset position of the currently scanned station will flash in the display. To select a scanned station and switch off the Radio-Scan function: • Press SC/MIX briefly.
PTY – Programme Type PTY is an RDS service offered by more and more radio broadcasters. This feature allows you to select FM stations according to their programme type. After you have chosen the PTY of your preference, the corresponding stations can be selected either by seek tuning or using the scan function. Switching PTY on/off • Press PTY. When the function is active, the programme type selected last will briefly appear in the display.
If you wish to listen to a station offering the selected PTY, press / to start seek tuning operation. If the system is unable to find a station offering the selected programme type, the display will show “NO PTY” and a beep tone will be released. The station received before starting seek tuning will be tuned in. • Storing programme types One programme type was assigned to each of the preset buttons 1-6 at the factory. If desired, you can also store other available programme types.
Receiving traffic programme stations with RDS-EON Notice: As earlier mentioned, these functions are currently only supported by a limited number of RDS stations. The abbreviation “EON” stands for Enhanced Other Networks, meaning the exchange of information within a radio network. Many FM broadcasters offer traffic messages for their service area at regular intervals. All traffic programme stations transmit a special carrier signal alongside their programmes, which is decoded by your car radio.
• Press TA. “TA” will disappear from the display. Automatic seek tuning start (CD and CDC operation) DEUTSCH Adjusting GEO for traffic messages and the warning beep You can separately adjust the balance and fader settings for both traffic announcements and the warning beep. For example, it is possible to listen to traffic reports via the front left (right) speaker only. This provides the driver with the important traffic information without bothering the rear passengers too much.
CD and CDC changer operation (optional) This car stereo is equipped with a CD drive. In addition, it offers you convenient control of a Blaupunkt CD changer CDC-A05 or CDC-F05. These changers are not included in the scope of delivery and can be purchased from your specialised dealer. CD operation Switching to CD operation Removing a CD Selecting a title • After having inserted the CD, the activated CD functions will appear on the display panel.
MIX CD In order to switch the MIX function on or off, • press SC/MIX briefly. CDC operation (optional) CD selection Up Switching to CDC operation Title selection Upwards: Press briefly. CUE - fast advance (audible): Keep depressed. Downwards: Press as many times as required. To restart a title: Press briefly. REVIEW - fast reverse (audible): Keep depressed. DEUTSCH MIX MAG – CDC-A 05 / CDC-F 05 All titles of the CD will be played at random.
CD and CDC operation Storing the display mode TPM Track Program Memory Selecting the display mode You can store your preferred display mode which will then be active each time the radio is switched on. If required, • press AF as many times until the desired setting is displayed. Use this feature to programme and play your favourite CD titles. Up to 30 CDs can be managed in the CD mode, up to 99 discs in the CDC mode.
CD operation Now this disc has been cleared from the TPM. • • Switch on TPM. • Switch on TPM. Press the CLR button for approximately eight seconds until “CLR TPM” appears in the display. • Press the CLR button for approximately 16 seconds until “CLR MAG” appears in the display. Now all of the discs have been cleared from the TPM. Switch on TPM. Switch on TPM. • Select the track with / . • Select the track with / .
CD and CDC operation Entering CD names In the CD mode you can name up to 30 discs and up to 99 for CDC operation. The specified name (e.g. VIVALDI) will appear in the display if you play the disc in the same operating mode (CD/CDC) that was active when entering the name. Be sure to select the display mode “NAME” using the AF button. To start the entry: • Press the DSC button. “CD-NAME” or “CDC-NAME” will be displayed. • Press . The first underscore character will flash.
LOUDNESS Loudness - When listening at a low level, the Loudness function creates a more natural sound by boosting the low frequency range. LOUD 1 - Low boost LOUD 6 - Max. boost TA VOL Select function Adjust/recall value DEUTSCH PORTUGUÊS / << >> To adjust the traffic announcement and warning beep volume from between 0 to 63. The message will then come through at this volume, if the standard volume is lower.
SPEECH In future many RDS radio stations will differentiate between music and speech programmes. You can alter the tone for speech programmes from between “SPEECH 0 ... 4”. ANGLE Use this setting to alter the viewing angle to your liking from -1 to 0 to +1. BRIGHT You can adjust the display brightness from between 1 to 16. You can also select different values for day and night. Selecting the night brightness: Switch on the vehicle lights and programme the brightness value.
To adjust the seek tuning sensitivity for distant reception. DX 1 - high sensitivity DX 3 - low sensitivity S-LO To adjust the seek tuning sensitivity for local reception. LO 1 - high sensitivity LO 3 - low sensitivity The seek tuning sensitivity values can be separately set for AM and FM. This menu item is not available if you have connected a CD changer (A 05 or F 05). The setting made at the factory is AUX OFF.
Appendix Specifications Amplifier Output power: Tuner Wavebands: FM : FM sensitivity: 4 x 23 W RMS power acc. to DIN 45324 at 14.4 V 4 x 35 W max. power 87.5 – 108 MHz 0.
ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS Blaupunkt-Werke GmbH Bosch Gruppe 10/97 Pf K7/VKD 8 622 400 718 29 München RDM126 d® 29 03.05.
