Operating Instructions and Installation Instructions

6
Placing the device in operation | Tra c information | Radio mode
Volume
Adjusting the volume
You can adjust the volume in steps from 0 (o ) to
50 (maximum).
Turn the rotary/pushbutton
>
to change the
volume.
Muting the car sound system (Mute)
Brie y press the rotary/pushbutton
>
to
mute the device or to reactivate the previous
volume.
While it is muted, "MUTE" is  ashing on the
display.
Setting the time
Press the DISPLAY button
2
for approx.
2 seconds to set the time.
Press the
/ button
=
to change
between hours and minutes.
The hour or minute display  ashes if it is
selected.
Turn the rotary/pushbutton
>
to set the
hours or minutes.
Press the rotary/pushbutton
>
to con rm
the time set.
Tra c information
In the reception area "EUROPE", an FM station can
identify tra c reports by means of an RDS signal.
If priority for tra c reports is switched on, a traf-
c report is automatically switched through, even
if the car sound system is currently not in radio
mode.
If priority is switched on, the display shows the
symbol. "TRAFFIC" is displayed during a
switched-through tra c announcement.
The priority is activated and deactivated in the
user menu (see the chapter "User settings", sec-
tion "Making settings in the "TUNER" menu", menu
item "TA").
Note:
The volume is increased for the duration of
the switched-through tra c announcement.
You can adjust the minimum volume for
tra c announcements (see the chapter "User
settings", section "Making settings in the
"VOLUME" menu", menu item "TA VOL").
Radio mode
RDS
Many FM stations broadcast an RDS (Radio Data
System) signal in addition to their programme
in the reception area "EUROPE" that allows the
following additional functions:
The station name is shown on the display.
The car sound system recognises tra c an-
nouncements and news broadcasts and can
automatically switch them through in other
operating modes (e.g. in USB mode).
Alternative frequency: If the AF function is
switched on, the car sound system automati-
cally tunes into the best receivable frequency
for the station that is currently set.
Regional: At certain times, some radio sta-
tions divide their programme into regional
programmes providing di erent content. If
the REGIONAL function is activated, the car
sound system changes only to those alternate
frequencies on which the same regional pro-
gramme is being broadcast.
The functions RDS, AF and REGIONAL are acti-
vated and deactivated in the user menu (see the
chapter "User settings", section "Making settings
in the "TUNER" menu", menu items "RDS", "AF" and
"REG").