Operating Instructions and Installation Instructions

7
Radio mode
Changing to radio mode
쏅 Press the SRC button 3 repeatedly until
"TUNER" is displayed:
Playback starts with the station that was
played most recently.
Select memory bank
쏅 Press the BAND/TS button 7 repeatedly
until the desired memory bank is displayed:
FM1
씮
FM2
씮
FM3
씮
AM1
씮
AM2
Note:
Up to 6 stations can be stored in each mem-
ory bank.
Tuning into a station
There are various ways of tuning into a station:
Tuning into stations manually
쏅 Brie y press the
/  button = once or
several times to incrementally change the
frequency.
Starting station seek tuning
쏅 Press the
/ button = for approx. 2 sec-
onds to start station seek tuning.
The radio tunes into the next receivable
station.
Notes:
• For the reception area "EUROPE": In the FM
waveband, only tra c information stations
are tuned into if the priority for tra c infor-
mation is switched on.
• The sensitivity of seek tuning can be ad-
justed (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "DX/LO").
Storing stations or calling stored
station
쏅 Select the desired memory bank.
쏅 If necessary, set the desired station.
쏅 Press the station button 1-6
< for approx.
2 seconds to store the current station under
the button.
- or -
쏅 Brie y press the station button 1 - 6
< to
call up the stored station.
Scanning stations
The scan function enables scanning the stored
stations of the current waveband.
쏅 Press the MENU button
1 for approx. 2 sec-
onds to start scanning.
During the scan, the display shows the mem-
ory location and the current frequency or
station name.
쏅 Brie y press the MENU button
1 to con-
tinue listening to the station that is currently
being scanned.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for
and store all receivable the stations in the FM and
AM wavebands. Any stations that were previously
stored are deleted in the process.
쏅 Select the desired waveband, e.g. FM1 or
AM1.
쏅 Press the BAND/TS button
7 for approx.
2 seconds.
The tuner starts the automatic station seek
tuning; the display shows "TS". After storing is
completed, the stored stations are scanned in
the order of the storage locations. Afterwards,
the station in memory location 1 of the FM1 or
AM1 level is played back.