Radio / Cassette Bologna C51 Düsseldorf C51 Hawaii DJ51 Kansas DJ51 Maryland DJ51 Operating and installation instructions
SVENSKA NEDERLANDS 3 5 16 15 7 14 13 8 ESPAÑOL 1 9 ITALIANO 4 PORTUGUÊS 2 FRANÇAIS 6 12 11 10 3 ENGLISH DEUTSCH
6 7 = > ? @ ENGLISH FRANÇAIS < ITALIANO : ; NEDERLANDS 5 9 MENU button - selects the menu for basic settings button - opens the flip/release panel Arrow-key block OK button - confirms menu entries and starts the scan function X-BASS button to adjust and switch X-BASS on/off AUDIO button (Audio) - adjusts bass and treble, balance and fader Key block 1 - 6 TRAF button, switches traffic information standby on/off CD•C button - selects between Cassette, CD changer (if connected) and AUX sources SVENSK
TABLE OF CONTENTS Notes and accessories ............. 29 Road safety ...................................... 29 Installation ........................................ 29 Accessories ..................................... 29 International telephone information .... 29 Flip/release panel ..................... 30 Switching on/off ....................... 31 Volume adjustment ................... 32 Setting the switch-on volume ............ 32 Mute setting .....................................
Installation If you would like to install your car radio yourself, please read the installation and connection instructions at the end of the manual. Amplifiers All Blaupunkt amplifiers are suitable for use with the radio. ENGLISH FRANÇAIS Remote controls The most important functions can be selected safely from the steering wheel using the optional remote controls RC 08 and RC 10. NEDERLANDS The following Blaupunkt CD changers can be connected to the radio: CDC A 06, CDC A 08, CDC A 072 and IDC A 09.
FLIP/RELEASE PANEL button 1. Flip/release panel ➮ Press the Theft protection This unlatches the flip/release panel. Your car radio is fitted with a flip/release panel to guard against theft. Without this panel, the unit is worthless to the thief. Protect your unit from theft by taking the flip/release panel with you every time you leave the car. Do not leave the panel behind in the car, even if it is out of sight. The constructive design of the panel makes for simple handling.
➮ To do so, press the button 3. Note: To protect the vehicle battery, the unit switches off automatically after one hour. ● Switching on/off using the flip/ release panel button, 9. ENGLISH ➮ press the The flip-release panel opens. ➮ Insert the cassette with the open side to the right gently into the drive until you can sense some resistance. The cassette is automatically drawn into the drive. As the cassette is drawn in, it must neither be held back nor assisted.
VOLUME ADJUSTMENT Volume adjustment Mute setting The system volume can be adjusted in steps from 0 (off) to 66 (maximum). This feature enables you to lower the system volume instantaneously (mute). ➮ To raise the system volume, turn the volume control 2 to the right. ➮ To lower the system volume, turn the volume control 2 to the left. Setting the switch-on volume You can set the volume at which you wish the car radio to play when switched on. ➮ Press the MENU button 8.
➮ Press the MENU button 8. ➮ Press the or button : repeatedly until “BEEP” appears on the display. ➮ Adjust the volume using the and buttons :. “0” means the beep is off, “9” means maximum beep volume. ➮ When you have completed the setting, press either the MENU button 8 or OK ;. ENGLISH PORTUGUÊS ESPAÑOL SVENSKA Note: You can adjust the volume level of telephone calls and of speech output as they are made with the volume control 2.
RADIO MODE Radio mode This unit is equipped with an RDS radio receiver. Many of the receivable FM stations transmit a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears on the display as soon as it is received. Switching to radio mode If you are in Cassette, CD changer or AUX mode: ➮ press the BND/TS button 5 repeatedly until “RADIO” appears on the display.
or button :. The unit tunes into the next receivable station. Tuning into stations manually You can also tune into stations manually. ➮ Press either the or buttons :. Note: ● You can only tune into stations manually if the RDS function has first been deactivated. Browsing through broadcasting networks (only FM) If a radio station provides several programmes, you have the option of browsing through its so-called “broadcasting network”.
RADIO MODE Storing stations automatically (Travelstore) Ending SCAN, continuing to listen to a station You can store the six stations with the strongest reception in the region automatically (only FM). The stations are stored in the FMT memory. ➮ Press the OK button ;. Note: ● Stations that were previously stored in this memory are deleted in the process. The scanning process is completed, the station last scanned remains active. Setting the scanning time ➮ Press the MENU button 8.
RADIO MODE ➮ Press the MENU button 8. ➮ Press the or button : repeatedly until “PTY ON” or “PTY OFF” appears on the display. or button : to switch PTY on (ON) or off (OFF). When PTY is activated, PTY lights up on the display. ➮ Press the ➮ Press the MENU button 8 or OK ;. DEUTSCH ent programme type, you can change to another programme time within the time the programme is displayed by pressing the or button :.
RADIO MODE Optimising radio reception Selecting radio text display High-frequency cut-off feature (HICUT) The HiCut function improves the sound during poor radio reception (only FM). If interference occurs, the treble is automatically reduced and thus also the interference level. Some radio stations use the RDS signal to broadcast advertising or other information instead of their station name. Such “radio texts” appear on the display. You can either allow or block the display of radio text.
Note: You will hear a warning tone, ● if you leave the reception area of a traffic information station to which you are currently tuned in; ● if you leave the reception area of a traffic information station when you are listening to a CD and the subsequent automatic search cannot locate a new traffic information station; ● if you retune the radio from a traffic information station to one that does not broadcast traffic information.
CASSETTE MODE Cassette Operation Changing Direction of Play Cassette Play To change between SIDE A and SIDE B ● If there is no cassette in the device ➮ Press the button 9. The flip-release panel opens. ➮ Insert the cassette into the cassette slot with the open side to the right. ➮ Close the control unit. The cassette starts playing with the side that is facing upwards. ● If there is already a cassette in the device ➮ Press the CD•C button @ until “CASSETTE” appears in the display.
CASSETTE MODE Fast Winding Fast forward ➮ Press the button :. “FORWARD” appears in the display. Fast rewind ➮ Press the button :. “REWIND” appears in the display. ➮ Press button 3 >. Play is interrupted and “PAUSE” appears in the display. ➮ Press button 3 ENGLISH DEUTSCH To interrupt tape play FRANÇAIS Pausing During Play > again to resume play. ITALIANO Note: ● The duration of samples can be adjusted. Refer to the section on “Setting Sample Time” under “Radio Operation”.
CASSETTE MODE Skipping Blank Tape Dolby* B Noise Reduction You can automatically skip sections of blank tape that last longer than 10 seconds. This requires the blank skip function to be activated. You should switch on the Dolby function whenever you play tapes recorded using the Dolby B process. Note: ● The blank skip can only be set if a cassette is being played. When the Dolby function is switched on, shows in the display. Switching Blank Skip On / Off ➮ Press the MENU button 8.
Selecting a CD ➮ To change up or down to a different CD, press the or button : once or several times. Selecting a track ➮ To move up/down from one track to another on the current CD, press the or button : once or several times. Fast track selection For fast track selection backwards or forwards: ➮ hold down either the or button : until fast track selection backwards or forwards begins.
CASSETTE MODE Random play (MIX) ➮ To play the tracks on the current CD in random order, press the button 5 MIX >. “MIX CD” appears briefly on the display and MIX lights up. ➮ To play the tracks of all the inserted CDs in random order, press the button 5 MIX > once again. “MIX ALL” appears briefly on the display and MIX lights up. Note: ● In the case of CD changers CDC A 08 and IDC A 09, all CDs in the changer are randomly selected.
➮ To set the time manually, press the MENU button 8. or button : repeatedly until “CLOCKSET” appears on the display. ➮ Press the ➮ Press the button :. The time appears on the display. The minutes flash and can now be set. ➮ Set the minutes using the or ➮ Once the minutes have been set, press the button :. The hours now flash. or or button : repeatedly until “CLK DISP OFF” or “CLK DISP ON” appears on the display. ➮ Press the button : to switch between ON and OFF. ➮ Press the buttons :.
TONE AND VOLUME BALANCE Tone and volume balance You can adjust the tone and volume balance separately for every audio source (radio, Cassette, CD changer, AUX and traffic announcements). Note: ● Adjustments to tone and volume balance for traffic announcements can only be made during a traffic announcement. Adjusting the bass ➮ Press the AUDIO = button. “BASS” appears on the display. ➮ Press the or button : to set the bass. ➮ Press the AUDIO = button once you have completed the setting.
X-Bass means increased bass at low volumes. Note: ● X-BASS can be adjusted separately for each audio source (radio, Cassette, CD-changer and AUX). The level indicator (spectrometer) on your display briefly indicates the volume, tone and equalizer settings with symbols on your display as you make the corresponding settings. When settings are not being made, the spectrometer indicates the original level of the car radio. You can also set the type of spectrometer on your menu. There are two types available.
EXTERNAL AUDIO SOURCES TECHNICAL DATA External audio sources Technical data In place of the CD changer it is also possible to connect other external audio sources to the line output. These sources can include a portable CD player, MiniDisc player or MP3 player. The AUX output has to be switched on in the install menu. To connect up an external audio source, you will need an adapter cable (Blaupunkt no.: 7 607 897 093), obtainable from any authorised Blaupunkt dealer.
GUARANTEE DEUTSCH Guarantee PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH The scope of the guarantee complies with the legal provisions applicable in the country in which the unit was bought. Should your car radio prove to be defective, please contact your dealer, presenting proof of purchase. If the legal guarantee period in your country is less than 12 months, Blaupunkt grants a 12-month manufacturer's guarantee.