Operation Manual

21
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Extra function AUD
Loudness - When the system is played
at a low volume level, the Loudness
function creates a more natural sound
by boosting the low frequency range.
Loudness on/off: Press AUD for ap-
proximately 1 sec.
LD lights up in the display, if the
Loudness function is switched on.
Please refer to DSC programming for
more information on how to program
the Loudness boost.
4 Rocker switch
/ Automatic tuning
Up
Down
<</>> Up/down in short intervals
(on FM only if AF is off)
On FM only:
<</>> To scroll through the station net-
works when AF is on, e.g. NDR 1,
2, 3, 4, N-JOY, FFN, ANTENNE ... .
Extra functions of rocker switch:
Further settings are possible with
AUD 3
DSC-Mode 7
Important: The corresponding function
has to be activated.
5 Display
i
c
de
g
fh
a
j
b
a) NDR1 NDS - Station name
b) TR 1 - Track (side) 1 of the cas-
sette
c) FM - Waveband
d) l, II, T - Memory bank I, II or
Travelstore
e) 5 - Preset button (1-5)
f) lo - Seek tuning sensitivity
g) AF - Alternative frequency for
RDS operation
h) TP - Traffic station is received
i) TA - Priority for traffic stations
j) LD - Loudness is activated
6 TS / BND
To select the FM memory banks I, II
and T (Travelstore).
To switch over:
Press button as often as required. The
selected mode appears in the display.
Travelstore
To store and recall the five most pow-
erful stations with Travelstore.
To store: Press button for approxi-
mately 1 sec. until you hear a beep
and T-STORE appears in the display.
To recall: Select the memory bank T
and press the corresponding preset
button (1-5) briefly.
Milano RCR 127,
San Marino RCR 127:
Additional selection of medium- and
long-wave stations, provided that
AM ON has been selected in the
DSC menu.
7 DSC (Direct Software Control)
Use the DSC function to customise
certain programmable, basic settings
to suit your personal needs and
preferences. See DSC programming
for more information.
Milano RCR127 gb® 24.05.2002, 11:13 Uhr21