Radio / Cassette Boston C32, Dublin C32 Ravenna C32, Florida DJ32 Louisiana DJ32 Operating instructions http://www.blaupunkt.
Bitte aufklappen Open here Ouvrir s.v.p. Aprite la pagina Hier openslaan a.u.b.
14 SVENSKA NEDERLANDS 4 5 13 6 7 8 12 11 ESPAÑOL 3 PORTUGUÊS 15 2 DANSK 1 ITALIANO 9 10 3 FRANÇAIS ENGLISH DEUTSCH
Radio / Cassette Boston C32, Dublin C32 Ravenna C32, Florida DJ32 Lousiana DJ32 Operating instructions http://www.blaupunkt.
Bitte aufklappen Open here Ouvrir s.v.p. Aprite la pagina Hier openslaan a.u.b.
14 SVENSKA NEDERLANDS 4 5 13 6 7 8 12 11 ESPAÑOL 3 PORTUGUÊS 15 2 DANSK 1 ITALIANO 9 10 3 FRANÇAIS ENGLISH DEUTSCH
CONTROLS 1 2 3 4 5 6 7 8 9 : ; 26 button, to release the control panel Button, to switch the unit on/off, to mute the unit’s volume Volume control cassette eject Cassette compartment button, fast tape winding button, fast tape winding Arrow buttons SRC button, to select the cassette, radio, CD changer or Compact Drive MP3 (if connected) and AUX sources.
Radio mode ............................ 33 Switching to radio mode ................ 33 RDS functions (AF, REG) .............. 33 Selecting the waveband / memory bank ................................. 33 Tuning into a station ....................... 34 Setting the sensitivity of station seek tuning .................................... 34 Storing stations ............................. 34 Storing stations automatically (Travelstore) .................................. 35 Listening to stored stations ...........
NOTES AND ACCESSORIES Notes and accessories Thank you for deciding to use a Blaupunkt product. We hope you enjoy using this new piece of equipment. Please read these operating instructions before using the equipment for the first time. The Blaupunkt editors are constantly working on making the operating instructions clearer and easier to understand. However, if you still have any questions on how to operate the equipment, please contact your dealer or the telephone hotline for your country.
Removing the control panel DEUTSCH ENGLISH FRANÇAIS ITALIANO Note: ● Never drop the control panel. ● Never expose the control panel to direct sunlight or other heat sources. ● Avoid making direct skin contact with the control panel's contacts. If necessary, clean the contacts with a lint-free cloth and some alcohol. NEDERLANDS As a way of protecting your car radio against theft, the unit is equipped with a removable control panel (release panel).
THEFT PROTECTION ➮ First, pull the control panel straight ● ● ● off the unit and then out towards the left. The unit switches off after the control panel is removed. All the current settings are saved. Any cassette already inserted in the unit remains there. Attaching the control panel ➮ Slide the control panel from left to right into the unit's guide. ➮ Press the left-hand edge of the control panel into the unit until it clicks into place.
ADJUSTING THE VOLUME Switching on by inserting a cassette If the unit is switched off and there is no cassette inserted in the drive, Adjusting the volume ENGLISH ➮ turn the volume control 3 to the right. To decrease the volume, 8 until “ON VOL” appears in the display. ➮ Set the power-on volume using the and buttons 8. To help you adjust the volume more easily, the volume will be increased / decreased as you make your changes.
ADJUSTING THE VOLUME When you have finished making your changes, Configuring the confirmation beep ➮ press the MENU button : twice. For some functions you will hear a confirmation beep if you keep a button pressed for longer than two seconds. For instance, after storing a radio station to a station button you will hear a confirmation beep. You can configure the beep. Instantaneous volume reduction (mute) This feature allows you to instantaneously reduce (mute) the volume to a level preset by you.
The RDS functions AF (Alternative Frequency) and REG (Regional) extend your radio’s range of functions. ● AF: If the RDS function is activated, the unit automatically tunes into the best receivable frequency for the station that is currently set. ● REG: At certain times, some radio stations divide their programme into regional programmes providing different regional content.
RADIO MODE Tuning into a station There are various ways of tuning into a station. Automatic seek tuning ➮ Press the or button 8. The unit tunes into the next receivable station. Tuning into stations manually You can also tune into stations manually. ➮ Press the or button 8. Note: ● You can only tune into stations manually if the RDS function is deactivated.
Stopping SCAN and continuing listening to a station You can automatically store the six stations with the strongest reception in the region (only for FM). The stations are stored in the FMT memory bank. ➮ Briefly press the MENU button :. Scanning receivable stations (SCAN) You can briefly play all the receivable stations. You can set the scanning time to between 5 and 30 seconds in the menu. Starting SCAN ➮ Hold down the MENU button : for longer than two seconds. Scanning begins.
RADIO MODE PTY-EON If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. Selecting a programme type and starting seek tuning Note: ● If no station is found that corresponds to the selected programme type, you will hear a beep and “NO PTY” appears briefly in the display. The station that was listened to last will then be tuned into again.
Switching HICUT on/off ➮ Press the MENU button :. ➮ Keep pressing the or button 8 until “HICUT” appears in the display. ➮ Press the or button 8 to set HICUT. “HICUT 0” means no reduction will be made, “HICUT 1” means a maximum automatic reduction of the treble level and interference level. When you have finished making your changes, Traffic announcement priority is active when a traffic jam symbol lights up in the display.
TRAFFIC INFORMATION if you retune the radio from a traffic information station to a station that does not broadcast traffic information. If you hear the warning sound, you can either switch off traffic information priority or tune into a station that broadcasts traffic information. ● Setting the traffic announcement volume ➮ Press the MENU button :. ➮ Keep pressing the or button 8 until “TAVOLUME” appears in the display. ➮ Set the volume using the and buttons 8.
button 7 until it locks. “REWIND” appears in the display. ➮ Press the opposite fast wind but- until “CHANGER” appears in the display. ton. Play continues. Playback begins with the first CD that the CD changer detects. Switching radio monitor on / off Selecting a CD While the tape is fast winding, you can listen to the radio station that was tuned last. This requires the “radio monitor” function to be switched on. To move up/down from one CD to another, ➮ Press the MENU button :.
CD CHANGER MODE Fast searching (audible) To fast search backwards or forwards, buttons 8 pressed until fast searching backwards / forwards begins. ➮ keep one of the Repeating individual tracks or whole CDs (REPEAT) If you wish to repeat the current track, ➮ briefly press button 4 (RPT) =. “RPT TRCK” appears briefly and RPT lights up in the display. If you wish to repeat the current CD, ➮ press button 4 (RPT) = again. “RPT DISC” appears briefly and RPT lights up in the display.
“PAUSE” appears in the display. To display the time, Cancelling pause ➮ keep the AUDIO ( ) button < Setting the time manually To set the time, To switch between the track number / CD number display and the track number / playing time display, ➮ press the MENU button :. ➮ Keep pressing the or button ➮ Press the button 8. The current setting is displayed. “TIME” for the playing time display and “CD NO” for the CD number display. button 8 to select the required setting.
CLOCK - TIME Selecting 12/24-hour clock mode ➮ Press the MENU button :. ➮ Keep pressing the or button 8 until “24 H MODE” or “12 H MODE” appears in the display. or button 8 to switch between the modes. When you have finished making your changes, ➮ Press the ➮ press the MENU button :. Displaying the time continuously when the unit is off and the ignition is on To display the time when the unit is off and the vehicle ignition is on, ➮ press the MENU button :.
You can adjust the sound settings for each source separately (radio, Cassette, CD changer/Compact Drive MP3 and AUX). To adjust the left/right volume distribution (balance), or button 8 to adjust the bass. When you have finished making your changes, ➮ Press the ➮ press the AUDIO button <. ➮ press the AUDIO button <. ITALIANO “BASS” appears in the display. or button 8 to adjust the balance (right/left).
X-BASS LEVEL DISPLAY X-BASS Setting the level display The X-BASS feature can be used to boost the bass at low volume levels. The level display briefly provides a symbolic display of the volume and the sound control settings whilst you are adjusting them. When you are not changing any settings, the level display can also be used to display the car radio’s output level (“PEAK ON”). You can also choose to deactivate the level display (“PEAK OFF”).
Instead of connecting a CD changer, you can connect another audio source equipped with a line output. The audio source, for example, can be a portable CD player, MiniDisc player or MP3 player. The AUX input must be activated in the menu. If you want to connect an external audio source, you will need an adapter cable (Blaupunkt no.: 7 607 897 093). You can obtain this adapter cable from your authorised Blaupunkt dealer. Amplifier “MENU” appears in the display.
Service-Nummern / Service numbers / Numéros du service aprèsvente / Numeri del servizio di assistenza / Servicenummers / Telefonnummer för service / Números de servicio / Número de serviço / Servicenumre Country: Phone: Fax: WWW: http://www.blaupunkt.
Service-Nummern / Service numbers / Numéros du service aprèsvente / Numeri del servizio di assistenza / Servicenummers / Telefonnummer för service / Números de servicio / Número de serviço / Servicenumre Country: Phone: Fax: WWW: http://www.blaupunkt.
