Operation Manual

CD mode (optional)

CD changer standby mode

If a CD changer has been connected to the car radio, then it is ready to

function as soon as it has been loaded with a filled CD magazine (refer

to illustration). Make sure you insert the magazine correctly and close

the sliding cover as soon as the magazine is in place. Now use the

front panel of the car radio in order to operate the CD changer.

Loading/unloading the CD changer

In order to remove the CD magazine, push the sliding cover of the

changer to the right and press the eject button. The magazine will eject

and you will be able to pull it out.

You can load up to 6 CDs into the magazine. When inserting the CD

into the magazine, the label must face up (Fig. 1)

Important: Any CDs inserted incorrectly will not be played. In order to

remove the CDs, you must press the corresponding eject level (Fig. 2).

The CD will eject out of the magazine halfway so that you can remove

it completely.

Fig. 2

Fig. 1

BA BP RNS 1 gb 17.01.2000, 9:44 Uhr70