RX 19-1 UKW-/MW-Radio mit USB/SD FM/AM Radio with USB/SD
RX 19-1 2
RX 19-1 3
RX 19-1 4
RX 19-1 5
RX 19-1 6
RX 19-1 7
RX 19-1 8
RX 19-1 9
RX 19-1 10
RX 19-1 11
RX 19-1 12
RX 19-1 13
RX 19-1 14
RX 19-1 15
RX 19-1 16
RX 19-1 17
RX 19-1 18
RX 19-1 19
RX 19-1 20
RX 19-1 21
RX 19-1 22
RX 19-1 23
RX 19-1 24
RX 19-1 25
RX 19-1 26
RX 19-1 Important Safety Instructions Important Safety Instructions Caution: To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable parts inside. Refer servicing to qualified personnel only.
RX 19-1 Conformity Model number: RX 19-1 Description: FM/AM Radio with USB/SD Brand name: Blaupunkt Responsible party: M3 Electronic GmbH Gutenbergstrasse 5, D-65830 Kriftel. Germany Hereby, Blaupunkt Competence Center Audio M3 Electronic GmbH, declares that this Class 1 equipment is in compliance with the essential requirement and other relevant provisions of Directive 1999/5/EC. Letter of conformity can be obtained from info@m3-electronic.de. Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
RX 19-1 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products, including amplifiers that produce heat. No naked flame sources, such as lighted candles, should be placed on the apparatus. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom.
RX 19-1 24. 25. 26. 27. 28. The only means of completely disconnecting the product from the power supply is by removing the power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must remain freely accessible at all times while the product is in use. Try to install the product near a wall socket or extension cord and shall be easily accessible. The highest environmental temperature suitable for this product is 35°C.
RX 19-1 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Never use the device unsupervised! Switch off the device whenever you are not using it, even if this only for a short while. The appliance is not intended to be operated by means of an external timer or separate remote control system. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
RX 19-1 Power Sources Rear Panel Plug the power cord to wall outlet AC Power 1. 2. Plug the power cord into an 230V wall outlet. Turn the “VOLUME” knob to right side on the front panel. Then the unit will power on.
RX 19-1 Location Of Controls Top Panel Rear Panel Front Panel 1. USB/SD/MMC SELECTOR 2. JUMP 10 TRACKS 3. NEXT 4. MP3 LINK 5. STOP 6. BACK 7. PLAY/PAUSE 8. SD INDICATOR 9. USB INTERFACE 10. USB INDICATOR 11. PLAY INDICATOR 12. SD/MMC SLOT 13. ANTENNA 14. POWER CORD 33 15. SPEAKER 16. FUNCTION SELECTOR 17. DIAL POINTER 18. POWER ON/OFF 19. VOLUME CONTROL 20.
RX 19-1 Other Features MP3 Link Select MP3 LINK mode to listen to external audio devices (like MP3 players or PC) connected through the 3,5mm MP3 LINK input on the top of the unit. 1. Use a 3,5mm male-to-male stereo cable to connect any external audio device with a 3,5mm headphone or line-out jack to the MP3 LINK at the top panel of the unit. 2. Start playback on the external audio device. Adjust unit volume (do not set the volume too high to avoid distortion). Auto Switch Standby 1. 2.
RX 19-1 USB Operation General Operation Insert USB into USB interface. Unit start playing from first track. PLAY/PAUSE Press Pause to stop playing temporarily. Press again to resume playback. NEXT Press to go to the next track. BACK Press to go to the previous track. STOP Press to stop all playback. +10 (jump 10 tracks) Press once to jump 10 tracks Press again to jump 10 more tracks Remark: Plug-in the USB stick directly or use an USB-extension cable which is not longer than 25 cm. Playback 1.
RX 19-1 SD Operation General Operation Insert SD card into SD slot interface. Unit start playing from first track. PLAY/PAUSE Press Pause to stop playing temporarily. Press again to resume playback. NEXT Press to go to the next track. BACK Press to go to the previous track. STOP Press to stop all playback. +10 (jump 10 tracks) Press once to jump 10 tracks Press again to jump 10 more tracks Playback 1. 2. 3. 4. 5. 6. Plug or slot in SD card device into the port.
RX 19-1 Technical Features General Features Power Supply: A.C. 230 ~ 240V 50Hz Power consumption (on mode): 14 Watt Power consumption (standby): < 0,5 Watt Size : 230 x 165 x 135 mm (L x W x H) Radio Section Frequency Bands: FM 88~108MHz AM 540~1600KHz This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU.
