User manual

16
General Setting
Program your system general setting under this menu. The items available include the following –
see a) to g):
a) PIN Code
The PIN code is used to access the User Menu, and Arm/Home/Disarm the system. The system
can store up to 4 User PIN Codes, each PIN code consists of 4 digits. When you
Arm/Home/Disarm the system, the Control Panel will record the User PIN Code used to perform
the action in system log for you to review. You can assign different User PIN Code to different
family member so that the Control Panel can record the arming/disarming action of each user.
 User PIN code 1 is set during the First Time setup process.
 User PIN code 2~4 are deactivated by factory default.
To set or change the PIN Code:
1. Select the User PIN Code you want to edit, press “OK” to confirm.
2. Enter the new User PIN Code in 4-digit number, press “OK” to confirm. If no number is entered,
the User PIN Code will be deleted (User PIN Code 1 cannot be deleted.)
3. Assign a user name to the new PIN Code, press “OK” to confirm.
 For entering user name with numeric keypad, please refer to the following table.
b) Master Code
The Master Code is used to access the Programming Mode for system setting.
 To change the Master Code, enter the new 4-digit code and press OK.
 Master Code factory default is set as 1111.
c) Entry Time
When a Door Contact (DC), PIR Detector (IR), or External PIR Detector (EIR) set to Entry attribute
is triggered when the system is under Away Arm or Home Arm mode, the system will begin a
countdown timer according to Entry Time setting. The system must be disarmed before the Entry
Time expires, or an alarm will be activated.
 Options available are: Disable (alarm triggers immediately) , 10 seconds, 20 seconds, up to 70
seconds in 10 second increments.
 20 seconds is set as factory default.
d) Exit Time
When the system is being Away Armed or Home Armed, the system will begin a countdown timer
according to the Entry Time setting. When the countdown timer expires, the system will enter the
selected Arm Mode. The user must leave the premises before the timer expires.
 Options available are: Disable (exit timer prohibited), 10 seconds, 20 seconds up to 70
seconds in 10 second increments.
 30 seconds is set as factory default.
1 1
2
2ABCabc
3 3DEFdef
4 4GHIghi
5 5JKLjkl
6 6MNOmno
7 7PQRSpqrs
8 8TUVtuv
9 9WXYZwxyz
0
0<space>/-
&’.”+:

Delete
character and
backspace