Operation Manual

7
Enter broadcast frequency directly
If the frequency of the desired stations is known, it can
be entered directly via the touchscreen.
쏅 Press the   button to display additional operat-
ing options.
쏅 Press the 
 button.
A numeric keypad is displayed for the frequency
input.
쏅 Enter the frequency of the desired station with the
numeric keypad.
쏅 Press the  OK  button.
The radio playback menu is displayed, the station of
the frequency entered is played back.
Starting station seek tuning
쏅 Press the 
 or   button for approx. 2 sec-
onds to start station seek tuning.
The radio tunes into the next receivable station.
Note:
For the reception area Europe: In the FM waveband,
only tra c information stations are tuned into if the
priority for tra c information is switched on.
Storing stations manually
쏅 Select the desired memory bank with the   but-
ton.
쏅 Set the desired station.
쏅 Press one of the memory buttons  P1  -  P6  for
approx. 2 seconds to store the current station at the
button.
The station is stored.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for and
store the 6 FM stations o ering the strongest reception
in the region in the current memory bank. Any previously
stored stations in this memory bank are deleted in the
process.
쏅 Select a memory bank.
쏅 Press the 
 button to display additional operat-
ing options.
쏅 Press the  TS  button.
The tuner starts the automatic station seek tuning.
After the storing is completed, the radio plays the
station at memory location 1 of the previously se-
lected memory bank.
Note:
For the reception area Europe: With switched-on pri-
ority for tra c information, only tra c information
stations are stored.
Scanning stations
You can use the scan function to play all the receivable
stations of the current waveband for a few seconds.
쏅 Press the 
 button.
The seek tuning searches for stations in the current
waveband. Each receivable station is played for a few
seconds in the process.
쏅 Pressing the 
 button again selects the currently
scanned station and plays it back.
Switching RDS on/o
Many FM stations broadcast an RDS (Radio Data System)
signal in addition to their programme in the reception
area Europe that allows additional functions, such as the
display of the station name.
쏅 Press the 
 button to display additional operat-
ing options.
쏅 Press the  RDS  button to switch the RDS function
on or o .
If the RDS function is switched on, RDS is displayed
in white.
쏅 Press the 
 button to hide the additional oper-
ating options, or wait until they are automatically
hidden.
Switching the REG function (regional
programmes) on/o
Some RDS stations divide their programmes into region-
al programmes with di erent contents at certain times.
If the REG function is activated, the car sound system
changes only to those alternate frequencies of the set
station on which the same regional programme is being
broadcast.
쏅 Press the  REG  button to switch the REG function
on or o .
The REG button is illuminated if the REG function is
switched on.
Switching the AF (alternative frequencies)
function on/o
If the AF function is activated, the car sound system auto-
matically tunes into the best receivable frequency for the
station that is currently set.
쏅 Press the  AF  button to switch the AF function on
or o .
The AF button is illuminated if the AF function is
switched on.
Radio mode