Operating Instructions

BR460 22.05.19 17:00
1010
Press the DIS button to toggle between the displays:
Changing to MP3/WMA/iPod mode
Press the SRC button repeatedly until the desired audio source is dis-
played:
• "SD(HC)": Inserted memory card
• "USB FRONT" or "USB REAR": USB data carrier connected to
the front or rear.
• "IPOD FRONT / IPHONE FRONT" or "IPOD REAR / IPHONE REAR":
Connected iPod / iPhone at the front or rear side
• "AUX": Connected external audio source.
Conguring the display | MP3/WMA/iPod mode
Note:
• If no station with the selected programme type is found ,”NO PTY” is
briey displayed and 2 beeps can be heard. The radio will then retune
to the station that it played last.
• If the tuned radio station or another station on the broadcasting
network broadcasts your selected programme type at a later point
in time, the car sound system will automatically switch from the
currently tuned station or from the current audio source (e.g. USB)
to the station whose programme type matches the one you selected.
Note that this function is not supported by all stations.
Switch o the car sound system so that the data carrier will be corr-
ectly registerd.
First, pull the protective cap of the USB port : to the front until it
moves out of the port and fold it to the right to connect a data car-
rier to the USB port at the front of the device.
Note:
iPod mode
Connecting/removing a USB data carrier
Connecting a USB data carrier
• A list of compatible iPod and iPhone models is located at the end of
these instructions. Blaupunkt can not guarantee the awless func-
tion of other iPod and iPhone models.
Note:
• If the connected USB data carrier cannot be seen, “USB ERROR” is
briey displayed.
• The time required for reading in the data depends on the design
and size of the USB data carrier.
Note:
• You can connect USB data carriers to the USB port at the front of
the device as well as the rear USB port.
• If an iPhone and iPod are connected at the same time, the devices
are charged via the USB ports. If two iPhones are connected at the
same time, charging is not possible.
You can connect numerous iPod and iPhone models to the car sound sys-
tem via the USB port in the front of
the device and the USB port at the
rear and control the audio playback from the car sound system.
ENGLISH
Conguring the display
Display Meaning
ABCDEF Station name
RADIO TEXT
Radio text, only if
available
P1 FM1 89.90
Memory location/
memory bank/frequency
P1 FM1 08:40
Memory location/
memory bank/time
Use a suitable adapter cable to connect your iPod or iPhone with the
USB port of the car sound system.
Connect the USB data carrier.
Turn on the car sound system. If the USB data carrier is initially sele-
cted as audio source ,the data are read rst.