Operating Instructions

HANDSFREE VOL
Adjusting the minimum volume for telephone calls. Settings: 1 – 50.
Press the rotary control to change the setting.
Turn the rotaty control to set the volume.
Press the rotary control to conrm the setting.
Note:
During the phone call, you can change the volume directly by
means of the volume control.
BEEP (button beep)
Switching the conmation beep on or o Settings: ON, OFF.
Switching the permanent display on or o Settings: ON, OFF.
Note:
When storing radio stations, a conrmation beep sounds even if the
OFF setting is selected.
Press the rotary control to change the setting.
Turn the rotary control to change between the settings.
Press the rotary control to conrm the setting.
Press the rotary control to change the setting.
Turn the rotary control to change between the settings.
Press the rotary control to conrm the setting.
Press the rotary control to change the setting.
Turn the rotary control to change between the settings.
Press the rotary control to conrm the setting.
Press the rotary control to conrm the time setting.
Press the rotary control to change the setting.
Turn the rotary control to change between the settings.
Press the rotary control to conrm the setting.
BR460 22.05.19 17:00
2727
User settings
Making settings in the "CLOCK" menu
PERM CLOCK
.
If the permanent display of the time is switched on, the time is shown on
the display. The display of the respective audio source is shown only after
pressing a button. Approximately 15 seconds after the button is pressed
last, the time is displayed again.
HOUR MODE
Selecting the 12 or 24-hour time. Settings: 12, 24.
SET
Setting the time.
Press the rotary control to change the setting.
Turn the rotary control clockwise to set the hours.
Turn the rotary control counter-clockwise to set the minutes.
Note:
When you set the time in 12-hour mode (HOUR MODE 12), an
"AM" is displayed before the time for the time before noon or a "PM"
for the time after noon.
RDS CLOCK (automatic time setting) (only for reception area EUROPE)
Switching automatic clock setting with clock data transmitted via RDS on
or o . Settings: ON, OFF.
Switching the DEMO mode on or o . Settings: ON, OFF.
Note:
The time set with the clock data may not be correct, even if an RDS
station is being received.
Press the rotary control to change the setting.
Turn the rotary control to change between the settings.
Press the rotary control to conrm the setting.
Making settings in the "VARIOUS" menu
DEMO MODE
In demo mode, the features of the radio are shown as scrolling text on the
display.