Operating Instructions

BR460 22.05.19 17:00
88
Press the button SRC repeatedly until the desired memory bank is
displayed.
Note:
• If you adjust a dierent reception area than “EUROPE ”, RDS is automati-
cally switched o . The station name continues to be shown on the
display. If you want to use radio stations with RDS features in your
region, switch on RDS in the user menu.
Note:
•
Up to 5 stations can be stored in each memory bank.
• You can disable certain memory banks that you do not want to
use (see chapter "User settings", section "Making settings in the
"TUNER" menu", menu item "BAND SELECTION"). Deactivated
memory banks are skipped during the source selection with the
SRC button.
Radio mode
The functions RDS and REGIONAL are activated and deactivated in the user
menu (see the chapter "User settings", section "Making settings in the
"TUNER" menu", menu items "RDS AF" and " REGIONAL").
The following memory banks are available in the di erent reception areas:
Tuning into a station
There are various ways of tuning into a station.
Starting station seek tuning
Turn rotary control one notch counterclockwise or clockwise to
start station seek tuning.
The display shows "SEARCH AUTO". The radio tunes into the next
receivable station.
Notes:
• For the reception area "EUROPE": In the FM waveband, only trac
information stations are turned into if the priority for trac
information（ ) is switched on.
• The sensitivity of seek tuning can be adjusted (see the chapter
"User settings", section "Making settings in the "TUNER" menu",
menu item "SENSITIVITY").
Tuning into stations manually
Changing to radio mode or selecting a memory bank
Press the rotary button once to activate manual station tuning.
The display shows "SEARCH MANUAL".
Turn the rotary control to change the frequency in increments.
Note:
The manual station tuning is automatically exited approx. 15 sec-
onds after the last frequency change, and the station seek tuning is
started by turning the rotary control .
Storing stations or calling stored stations
Select the desired memory bank.
If necessary, set the desired station.
Press the station button for approx. 2 seconds to store the
current station under the button.
1 - 5 >
- or -
Briey press the station button 1 - 5
> to call up the stored station.
ENGLISH
Region Memory banks
EUROPE FM1, FM2, FMT, AM, LW
ASIA
FM1, FM2, FMT, AM, AMT
USA
SOUTH AMERICA
THAILAND