EASY www.blaupunkt.com Mobile Navigation Operating and installation instructions (Long version) _TP_EASY_lo_GB.indd 1 23.10.
Device overview Device overview 1 2 3 4 5 2 _TP_EASY_lo_GB.indd 2 23.10.
Device overview 1 On/Off switch: • Long press (longer than 3 seconds): Switches the device to idle state. • Long press (longer than 5 seconds): Switches the device on or off. 2 Display (touchscreen): Simple and intuitive operation by touching the buttons on the display. 3 Memory card slot 4 Reset button 5 USB port for battery charging/data transfer 3 _TP_EASY_lo_GB.indd 3 23.10.
Contents Device overview ..................................2 Safety notes ........................................7 Warning symbols used ...........................7 Use as directed .....................................7 Road safety ..........................................7 General safety notes ..............................7 Cleaning notes ......................................8 Disposal notes ......................................8 Initial startup ......................................
Contents Route guidance..................................21 Starting the route guidance ...................21 Reaching the place of destination ..........21 Quitting the destination guidance ..........21 Disturbed GPS reception ......................22 Voice output during route guidance ........22 Map display during route guidance .........22 Navigation tools ...............................22 Trip information display.....................23 Speed limit......................................
Contents Regional settings* ................................33 Adjusting the program language .........34 Adjusting the voice profile .................34 Adjusting units .................................34 Adjusting date & time format settings ...34 Adjusting time and time zone settings ...34 Warning settings* ................................34 Warn when speeding ........................34 Adjusting radar warning settings.........35 Activating Warn if too fast for a pedestrian ..............................
Safety notes Safety notes General safety notes For your personal benefit, carefully read the following safety notes before operating the device for the first time. Observe the following notes to protect the device against defects and yourself against injuries and life-threatening dangers from an ignition or explosion: • Protect the device against moisture since it is not waterproof and not splashproof. • Do not modify or open the device. Otherwise, it could be damaged and then ignite or explode.
Safety notes | Initial startup Cleaning notes Clean the display with a dry, soft cloth. Water and other liquids could damage the display. Do not use strong detergents for cleaning the housing. Use only a moistened, lintfree cloth. Disposal notes Use the return and collection systems available to dispose of the old device. Do not discard any batteries in the household trash; instead, return them to the corresponding collection sites.
Switching on the device 쏅 Connect the battery charger or the charger cable for the cigarette lighter to the charging socket. Note: The battery is equipped with a protection against overheating from excessive current flow. The protection prevents charging the battery starting at an ambient temperature above 45 °C. Switching on the device Select simple mode/advanced mode After setting up the language and confirming the licensing contract, 2 modes are offered for operation.
Installation in the vehicle Installation in the vehicle For temporary installation in a vehicle, the navigation device features a holder to attach it to the windshield. DANGER! The installation at an unsuitable location can cause injuries. Install the navigation device so that it does not block your view and does not distract from the traffic. Do not install the device in the airbag deployment area. Ensure that the device does not pose a threat to passengers in the vehicle in case of emergency braking.
Switching on/off | Operation of menus Removing the mount from the bracket The mount of the device can permanently remain in the suction cup holder. If you want to remove the mount from the suction cup holder, proceed as follows: 쏅 Firmly push the small lever on the suction cup holder together. 쏅 Pull the mount up and away from the holder. Switching on/off The device can be switched on and off with the On/Off switch 1. Switch-on 쏅 Press and hold the On/Off switch 1 for longer than 5 seconds.
Operation of menus | Information about GPS Route* advanced menu The Route menu can be accessed only if you already entered a destination or planned a route with several interim destinations. The Route menu provides an overview and additional functions for the calculated routes. You can edit or fly over the routes. Relevant descriptions can be found in the chapters "Route planning" and "Fly over/Simulate". Manage* advanced menu In the Manage menu, you change saved routes and manage the entire track log.
Information about GPS | Navigation 쏅 In the Navigation Menu, touch the Map button. The map is displayed. Touch the symbol. 쏅 The Quick Menu is displayed. 쏅 Touch the GPS button. The GPS-Data menu is displayed. Navigation The navigation device does not release you from your responsibility as a driver for correct and prudent behaviour in traffic. DANGER! Distraction from the traffic can cause accidents. Do not operate the device while driving. View the display only during safe traffic situations.
Navigation Notes: • After the destination entry, you can start the route guidance or store the destination. For further details, read the chapter "Additional functions after the destination entry". • The route guidance starts as soon as a GPS signal is received. Note: You do not have to repeat entering the country, city and street information every time. Only if your destination is at a different location than the previous one will you have to re-enter the destination address.
Navigation 쏅 쏅 쏅 쏅 쏅 A coordinate with latitude and longitude is displayed as an example. Touch the Coordinate Display Format button to switch between decimal and DMS format (Degree, Minutes and Seconds) for the coordinates. Touch a latitude directly to change it. The N/S button allows you to switch between latitude north and south. Touch a longitude directly to change it. The E/W button allows you to switch between longitude east and west. Touch the Done button.
Navigation | Route planning 쏅 Touch the symbol in the Where to search? menu to find a point of interest on the currently selected route. 쏅 Select the POI group. 쏅 Select the point of interest. 쏅 Touch the Set as Destination button to start the route guidance. Selecting a point of interest on the map Touch the symbol in the Where to 쏅 search? menu. The map is displayed. 쏅 Move and scale the map as described in the chapter "Working with the map". 쏅 Touch a location of your choice.
Route planning – Starting the route planning 쏅 Touch the symbol in the navigation menu. The Route menu is displayed. Track information The Route Information menu contains information about the route, e.g. about driving time and distance with the current route settings (method). Touch the symbol. 쏅 The Route information menu is displayed. 쏅 Touch the Plan on Map button to display the route on the map. 쏅 Touch the Start Navigating button to start the route guidance. Touch the button to exit the menu.
Route planning | Fly over/simulate Saving a route Fly over/simulate* 쏅 Conveniently plan your vacation trip at home and gain an overview of the route and travel time – even without GPS reception. Select "Fly Over" or "Simulate": A flyover consists of a quick display of the route without voice guidance. During simulation, the route is simulated with voice guidance and realistic speed. Touch the symbol to save the route. The keyboard is displayed. 쏅 Enter a name for the route. 쏅 Touch the Done button.
Additional functions after the destination entry Additional functions after the destination entry Prerequisites: • You entered a destination as described in the chapter "Destination entry". - or • You entered a point of interest as described in the chapter "Points of interest". - or • You selected a position on the map as described in the chapter "Working with the map", "Touching the map". The map is displayed. 쏅 Touch the Set as Destination button to start the route guidance.
Additional functions after the destination entry Destinations from the Favourites can be renamed (ch. "Manage"). You can delete individual destinations again from both lists (ch. "Manage"). Saving a destination entered/one of the last destinations as favourite Prerequisite: • You entered a destination as described in the chapter "Destination entry". - or • You selected a destination from the History list as described in the chapter "Destination entry". The map is displayed.
Route guidance Route guidance DANGER! Disregarding traffic rules can lead to accidents. Follow the turn-by-turn directions only if the street routing and traffic rules allow it. The navigation device will bring you to your destination even if you have to deviate from the planned route. Note: You can always use the map or arrow display for orientation purposes. Starting the route guidance When you start the route guidance, a route is calculated with your settings (ch. "Specifying route settings").
Route guidance Disturbed GPS reception Navigation tools If the GPS reception is disturbed during route guidance for an extended period of time, the route guidance is stopped. As soon as the reception is re-established, the device automatically recognises whether your position has changed and, if necessary, recalculates the route. At that time, you can simply continue your destination guidance.
Route guidance Trip information display The Destination menu contains information about the route, e.g. about driving time and distance. Touch the symbol. 쏅 The Destination menu is displayed. 쏅 Touch the different buttons to display the data during the route guidance. You can select up to 3 buttons. The selected button is marked. Speed limit The left area of the map shows the speed limit if it is exceeded (ch. "Navigation settings").
Working with the map Note: If you touch any place in the map during the route guidance, an add-on menu with additional functions is displayed. For further details, read the chapter "Additional functions during the route guidance". Working with the map Showing a map 쏅 In the navigation menu, touch the Map button. Touch the symbol to close the map 쏅 view and return to the navigation menu.
Working with the map | Manage Quick Menu Manage In the Quick Menu, you perform settings that are frequently used during the navigation. Touch the symbol to open the Quick 쏅 Menu. In the Manage menu, you manage the different route options, your user data as well as the favourites and last destinations. The chapter "Manage POI" describes how you edit points of interest and change symbols as well as groups.
Manage Manage history Managing user data 쏅 쏅 In the Manage menu, touch the User Data Management button. The User Data Management menu is displayed. 쏅 Touch the Remove Pins button to delete the pins you set. - or 쏅 Touch the Backup User Data button to create a backup of your user data. Note: To be able to back up your user data, a memory card must be located in the card slot. The data can be saved only onto a memory card. - or 쏅 Touch the Restore User Data button to restore your user data.
Manage POI Manage POI* In the Manage POI menu, you can edit and delete your points of interest. The following setting options are available: • Create a new group • Changing group details • Changing POI details 쏅 Touch the symbol in the Manage menu. The Manage POI menu is displayed. 쏅 Touch the button My POI or All to change between the POIs you created and all POIs. 쏅 Touch the buttons to scroll through the menu. Create a new group Create groups to sort your POIs. 쏅 Touch the New Group button.
Manage POI Changing a POI symbol 쏅 Touch the button with the blue symbol. A list of symbols is displayed. Touch the buttons to scroll 쏅 through the list of symbols. 쏅 Touch the desired symbol to assign it to the POI. Changing a POI position Touch the symbol. 쏅 The map is displayed with the position of the POI. 쏅 Touch the desired position on the map. 쏅 Touch the Select button. The new position is assigned. Entering a new phone number Touch the symbol. 쏅 The Phone Number Input menu is displayed.
Manage POI | Track log 쏅 In the X:\content\ folder, create a folder called "userdata". 쏅 In the X:\content\userdata\ folder, create a folder called "route". 쏅 Place the KML file in the X:\content\userdata\ route\ directory. In this case, "X" represents any drive letter that your PC creates for the TravelPilot. The route data are now available on your TravelPilot. 쏅 Start the TravelPilot in advanced mode. 쏅 Click on the Route button. 쏅 Click on Load Route button. 쏅 Select your stored route from the list.
Track log | Settings Assigning a colour to a route The route is shown on the map in the selected colour. 쏅 Touch the button with the desired colour. - or 쏅 Touch the button to hide the route on the map. Displaying the route on the map 쏅 Touch the Fit to Screen button. The route is shown on the map. Deleting a track log 쏅 Touch the Delete button. 쏅 Touch Yes to delete the track log. - or 쏅 Touch No to cancel the procedure.
Settings Map display* You can perform these settings: • 3D settings • Colour profiles • 2D terrain • Display street names • Lane information In the Settings menu, touch the sym쏅 bol. The Map Screen Settings menu is displayed. 3D settings In the 3D settings, you define which of the existing 3D objects should be shown on the map. You also specify how detailed this display should be. 쏅 Touch the Landmarks button to activate the 3D display for landmarks (check mark) or to deactivate it (no check mark).
Settings Route planning settings* 쏅 In the Settings menu, touch the symbol. The Route Settings menu is displayed. 쏅 Touch the Vehicle button to select a speed profile. Note: The "Emergency" profile is intended specifically for emergency personnel and will also guide you through one-way streets or special routes. 쏅 Touch the Road Types Used for Route Planning button to allow certain road types (check mark) or to avoid them (no check mark).
Settings Automatic overview mode 쏅 Touch the Automatic Overview button to activate (check mark) or to deactivate (no check mark) this function. With activated function, the map switches to overview mode until the next action on your route falls below a certain distance. In overview mode, the map is reduced and displayed in 2D. You can perform additional settings for the automatic overview mode: 쏅 Touch the button with the three dots to display additional settings.
Settings Adjusting the program language The button shows the program language currently in use. 쏅 Touch the Program Language button to select from a list of available languages. 쏅 Touch the OK button. 쏅 Confirm the restart of the device. The device starts in the selected language. Adjusting the voice profile The button shows the voice profile currently in use, the voice used and the version number. 쏅 Touch the Voice Profile button to select from a list of available languages and voices. 쏅 Touch the OK button.
Settings Note: The speed information is not available for every region. Please inquire at your dealership. 쏅 Touch the button with the three dots to display additional setting options. 쏅 Touch the In built-up areas slide control to adjust a tolerance value for built-up areas. In this case, 100% corresponds to the exact speed limit. 쏅 Touch the Elsewhere slide control to adjust a tolerance value for other areas. In this case, 100% corresponds to the exact speed limit.
Settings Track log settings* You can perform these settings: • Update interval • Auto save active • Maximum route memory • Create NMEA/SIRF log In the Settings menu, touch the but쏅 ton to scroll to the second page of the menu. Touch the symbol. 쏅 The Track Log Settings menu is displayed. If you performed changes to the settings: Touch the button to exit the menu.
Software | Service | Warranty | Technical data Software Updating the navigation software To ensure that your navigation device is always state-of-the-art, Blaupunkt offers software updates at regular intervals. They can be found on the Blaupunkt Internet site www.blaupunkt.com. Service In some countries Blaupunkt offers a specific repair service including a pick-up service. In case your device has to be sent to Blaupunkt for service you can order a pick-up service for your device on the Internet.
Troubleshooting table Troubleshooting table Problem Cause Measure The device does not work or The operating system is over- Perform a reset (ch. "Switching does not work correctly. loaded. on/off"). Reset the factory settings (ch. "Settings"). All personal settings will be deleted! The display remains dark if I The display may temporarily Place the device in the shade for switch on the device.
Troubleshooting table Problem Cause Measure The device has no or only a very After switch-on, the device repoor GPS reception. quires approx. 1 minute until it is ready for navigation. During the initial switch-on, it requires a longer time and a strong GPS signal. Move to the outside and place the device on high ground. Your device is operational again after no more than 2 to 5 minutes. At that time, the navigation is also possible under less than perfect The GPS reception is generally conditions.
Country: Phone: Fax: Germany (D) 0180-5000225 05121-49 4002 Austria (A) 01-610 39 0 01-610 39 391 Denmark (DK) 44-898 360 44-898 644 Finland (FIN) 09-435 991 09-435 99236 Great Britain (GB) 01-89583 8880 01-89583 8394 Greece (GR) 210 94 27 337 210 94 12 711 Ireland (IRL) 01-46 66 700 01-46 66 706 Italy (I) 02-369 62331 02-369 62464 Luxembourg (L) 40 4078 40 2085 Norway (N) +47 64 87 89 60 +47 64 87 89 02 Portugal (P) 2185 00144 2185 00165 Spain (E) 902 52 77
