www.blaupunkt.com Mobile Navigation TravelPilot Lucca 5.3 Operating and installation instructions Long version Lucca_5_3_long_GB.indd 1 01.11.
Device overview 1 2 3 4 5 6 7 8 9 : ; < = 2 Lucca_5_3_long_GB.indd 2 01.11.
Device overview 1 VOL -: Decreases the volume 2 On/Off switch: Short press: Starts the device or switches it to idle state. Long press (longer than 3 seconds): Switches the Lucca off. 3 VOL +: Increases the volume 4 Display (touchscreen): All entries and the control of Lucca are carried out in a simple and intuitive way by touching the buttons displayed on the display.
Contents Lucca scope of delivery ........................7 Safety notes ........................................7 Use as directed .....................................7 Safety notes for navigation......................7 Safety notes for handling the Lucca .........7 Notes for handling the DVD .....................8 Initial startup of Lucca .........................8 Protective film and covers .......................8 Charging the battery ..............................8 Setting the language .................
Contents Deleting a destination .......................25 Delete all destinations (last locations only) ..........................25 Route planning with stages ...................25 Entering the starting point .................25 Adding additional route points ...........25 Deleting a route point........................26 Optimising the sequence ...................26 Changing the order ...........................26 Start destination guidance.................26 Route simulation .............................
Contents Playing music files ...............................40 Navigating through the music files.......41 Changing to the music browser...........41 Repeated play of music files (Repeat) ..41 Random play of music files (Shuffle) ...41 Showing image files .............................41 Navigating through the image files ......41 Display image folders ........................41 Rotating image files ..........................41 Changing to the picture browser .........42 Configuring the slide show.................
Scope of delivery | Safety notes Lucca scope of delivery The scope of delivery contains the following components: • Lucca • Suction cup holder • Charger cable for cigarette lighter • Battery charger • USB cable • Antenna for TMC reception • Operating instructions (short version) • DVD with road maps and operating instructions (long versions), restore program • Cradle (Active Cradle available as an option) Note: We recommend the use of original Blaupunkt accessories.
Safety notes | Initial startup of the Lucca • Do not unplug the connector by pulling on the wire. The wire could be damaged! • Do not use strong detergents for cleaning the device. Use only a moistened, lint-free cloth. Notes for handling the DVD The device is supplied with a DVD that contains navigation software and map material. To protect the DVD against dirt and damage, observe the following notes: Store the DVD in its case. Hold the DVD only at the edge.
Initial startup of the Lucca | Installation in the vehicle • Do not dispose of defective batteries in the household trash. Return them to the corresponding collection facilities. Setting the language If you are starting up the Lucca for the first time, you must set your preferred language for the menus and the voice output. 쏅 To switch on the Lucca, press the On/Off switch below the display.
Installation in the vehicle | Switching on/off | Reset Attaching the cradle The suction cup holder features a mount for the cradle. 쏅 Snap the cradle with the suction cup holder into position. Installing Lucca in the cradle The Lucca features an opening on the underside for mounting the cradle. 쏅 Remove the elastic cover from the underside of the housing. 쏅 Place the Lucca on the mount of the cradle and snap the Lucca to the rear and into position.
Controls Controls Basic buttons Touch this button to return to the previous menu. Touch this button to change to the next page in the menu. Touch this button to confirm an entry or a setting. • • • Keyboard If text entries are required, the display shows a virtual keyboard. You can perform all the entries on the touchscreen by touching the respective symbol with your finger. You can only enter capital letters. You do not have to enter any special characters or umlauts when entering city or street names.
Performing basic settings Performing basic settings Before working with the Lucca, you should set the time zone that applies to your location so that the correct arrival times are displayed during your navigation. In addition, the PIN query allows you to lock out unauthorised persons from using the Lucca. 쏅 Touch the Format button to toggle between 12-hour and 24-hour display. 쏅 Touch the OK button. The Settings menu displays.
Performing basic settings | Compass Changing the PIN 쏅 In the Anti Theft Protection menu, touch the Change PIN Code button. 쏅 Follow the instructions and enter a new selfselected PIN. 쏅 Touch the OK button. Compass The Compass menu contains information about your current position and your current speed. Touch the symbol in the main menu 쏅 of the Lucca. The menu Navigation Menu is displayed. Touch the button. 쏅 The map is displayed. Touch the symbol in the map dis쏅 play. The Display menu is displayed.
Navigation Navigation General notes about the navigation Caution: Do not operate the Lucca while driving to protect yourself and others against accidents! View the display only if you are in a safe travel situation! The street routing and traffic signs have priority over the instructions of the navigation system. Follow the instruction of the Lucca only if circumstances and traffic regulations allow! Lucca will bring you to your destination even if you have to deviate from the planned route.
Navigation Entry via the keyboard 쏅 Enter a town in the Town menu or the postcode in the Postcode menu. During the entry, up to 3 possible results matching your entry are displayed above the keyboard. 쏅 Touch an entry of your choice. - or Touch the symbol. 쏅 The result list is displayed. 쏅 Touch an entry of your choice. The Road menu is displayed. You can enter a street, or navigate to the centre of town or a point of interest in the town: 쏅 Touch the Centre button tom navigate to the centre of town.
Navigation – Display destination on the map (see "Display map") – Save destination as favourite (see "Storing a destination address") – Defining route options (see "Specifying route options") – Display destination on the map (see "Display map") – Defining route options (see "Specifying route options") – For certain points of interest only (e.g. hospital, hotel): Call up destination (ch.
Navigation – For certain points of interest only (e.g. hospital, hotel): Call up destination (ch. "Bluetooth function", "Call up point of interest") Entering a point of interest The points of interest or POIs include specific locations such as hotels, parking options and petrol stations. These points of interest are stored in the map material and can be used as a navigation destination. Selecting a point of interest Touch the symbol in the main menu 쏅 of the Lucca. The menu Navigation Menu is displayed.
Navigation Selecting a point of interest in the destination area If you want to navigate to a point of interest in the destination area: Touch the symbol to select a point 쏅 of interest in the destination area. Note: This function is available only if you already entered a destination and started the destination guidance. The Name (search term) menu is displayed. You can enter a point of interest or display all points of interest: Enter a point of interest or a part of the 쏅 name and then touch the symbol.
Navigation – For certain points of interest only (e.g. hospital, hotel): Call up destination (ch. "Bluetooth function", "Call up point of interest") Travel guide The travel guide allows you to navigate to tourist attractions during your vacation trip. Selecting a travel destination Touch the symbol in the main menu 쏅 of the Lucca. The menu Navigation Menu is displayed. Touch the symbol. 쏅 The Select Destination menu is displayed. 쏅 Touch the Points of Interest button.
Navigation Note: This function is available only if you entered a destination and started the destination guidance. The Name (search term) menu is displayed. You can enter a travel destination or display all points of interest: Enter a travel destination or a part of the 쏅 name and then touch the symbol. - or 쏅 Touch the Display All ... button. A result list appears in both cases. 쏅 Touch an entry of your choice. The Detailed Information menu is displayed.
Navigation Fast retrieval Copying a destination from the map Fast retrieval allows you to directly access a specific points of interest category. You can define the category for fast retrieval in the Fast Retrieval menu. (ch. "Settings for navigation") Touch the symbol in the main menu 쏅 of the Lucca. The menu Navigation Menu is displayed. This function allows you to select the destination for a navigation directly on the map.
Navigation 쏅 Touch the symbol (flag) to adopt the city as the destination. The destination guidance is being started. 쏅 – Specifying route options In the Routing Settings menu, you can define the speed profile of your vehicle, select the type of routing and exclude certain streets from usage. The routing options are retained for every subsequent destination guidance. Touch the symbol in the main menu 쏅 of the Lucca. The menu Navigation Menu is displayed. Touch the symbol.
Navigation Destination guidance Start destination guidance After the destination entry, touch the 쏅 button in the Detailed Information menu. The route is calculated and the map displayed. Carsor: Your current position is represented by a blue triangle. The route is highlighted in blue. Compass: Always points north (for orientation) Notes: • The route is calculated using the settings for the route calculation.
Navigation Reaching the place of destination As soon as you have reached the destination point, the message "You have reached your destination" appears. The map now displays only your current position. Storing a destination address Each destination you entered and the destinations from the Recent Destinations list can be saved in the Favourites. This is particularly useful if you want to approach this destination repeatedly.
Navigation Deleting a destination You can delete a destination stored in the Favorites or a last destination: Touch the symbol in the Manage 쏅 Destinations menu. The Delete Favourite menu is displayed. - or Touch the symbol in the Manage 쏅 Destinations menu. The Delete One Last Location menu is displayed. 쏅 Touch the destination to be deleted. Touch the symbol. 쏅 Delete all destinations (last locations only) You can delete all the last destinations: Touch the symbol in the Manage 쏅 Destinations menu.
Navigation 쏅 Repeat the steps for all additional destinations (up to 5) to be added to the route. Note: After calculating your route, you can add any city as route point directly on the map: Touch a city on the map, followed by the symbol. The route is being recalculated. Deleting a route point 쏅 In the Route Planning menu, touch the route point to be deleted. 쏅 Touch the symbol. The route point is being deleted.
Navigation Map display during destination guidance During a navigation, the map display shows different navigation tools and route information. You can also change to the arrow display (ch. "Working with the map", "Additional functions") Caution The information on the digital road maps may no longer be current due to short-term changes (construction, etc.)! Additional information, e.g. the speed limit, can be shown only if they are contained in the map material.
Navigation Working with the map Display map Touch the symbol in the main menu 쏅 of the Lucca. The menu Navigation Menu is displayed. Touch the button. 쏅 The map is displayed. - or (directly after the destination entry) Touch the symbol in the Detailed 쏅 Information menu. The map is displayed. Moving and scaling the map To view the desired destination area on the map, you can move the map section and scale it (zoom in/out). Touch one of the symbols to 쏅 zoom in or out of the map.
Navigation Additional functions during the destination guidance The following functions can be used during a navigation: • Blocking route segments • Route description • Jump to a specific place on the map Blocking route segments During the destination guidance, you can block the route segment lying ahead of you. An alternate route is calculated and the blocked partial route is bypassed. Prerequisite: • Destination guidance - or • Route simulation Touch the symbol in the main menu.
Navigation | TMC function 쏅 Touch one of the symbols to jump to these locations on the map: – Your current position – Destination area – Entire route The map with the selected view is displayed. TMC function The Traffic Message Channel (TMC) supplies your Lucca with traffic reports that are broadcast by the radio stations with the RDS (Radio Data System) signal.
TMC function TMC station search You can adjust TMC stations automatically or manually: Touch the symbol in the TMC Trans쏅 mitter menu. The following settings are possible: Automatic Station Search: The – Lucca automatically searches for a TMC station. If the reception quality deteriorates, it immediately searches for a new station. Manual Station Search: Adjust a – TMC station of your choice. If the reception deteriorates, the Lucca does not automatically search for a new station.
Configuring Lucca Configuring Lucca The Lucca features two menus in which you can perform settings: • Device settings: The properties of the device are defined here. • Setting for the navigation: The properties of the navigation are defined here.
Configuring Lucca Display In the Representation menu, you can set the display brightness for day and night mode. Touch the symbol. 쏅 The Representation menu is displayed. 쏅 Touch the Brightness Day button to set the display brightness for day mode, and confirm with OK. 쏅 Touch the Brightness Night button to set the display brightness for night mode, and confirm with OK. Factory settings In the Factory settings menu, you can reset the navigation software to the factory settings and configure the USB interface.
Configuring Lucca If you activate the function, the Lucca automatically switches to night mode at sunset. Note: The automatic mode requires that the time zone is set correctly ("Time" section in this chapter). 쏅 Confirm the setting with OK. Theft protection In the Anti-Theft Protection menu, you can assign a PIN and a PUK to the Lucca to protect it against unauthorised use. The PIN can be changed at any time. Register under http://puk.blaupunkt.com to securely store your PUK.
Configuring Lucca Speed limit In the Speed Limit menu you can define whether speed limits should be displayed during the navigation and whether you should be warned audibly if you are exceeding the speed limit. Caution: The information on the digital road maps may no longer be current due to short-term changes (construction, etc.)! Additional information, e.g. the speed limit, can be shown only if they are contained in the map material.
Configuring Lucca Preferred petrol stations You can adjust your preferred petrol station brands to display them as preferences when searching for a petrol station. This is particularly useful if you have a petrol station customer card. Touch the symbol. 쏅 A list with available petrol station brands is displayed. 쏅 Touch your preferred petrol station brands in the list. You can select several petrol stations.
Data transfer Data transfer You can provide the Lucca with data (road maps, music data, image files and video files) via an SD/ MMC card. The Lucca supports SD/MMC cards with a storage capacity of up to 4 GB. Caution: Risk of damage If you connect the Lucca via a USB cable with your computer, you have access to the internal memory of the Lucca and the SD/MMC card. If you change or delete files in the internal memory, it may render the Lucca inoperable.
Bluetooth function Bluetooth function Bluetooth is a wireless radio connection over a short distance. Hence, a Bluetooth-capable cell phone allows using the Lucca as a hands-free system. In addition, it can play and operate music tracks stored on the cell phone. Prerequisite: • Compatible Bluetooth cell phone (ch. "Technical data") Starting the Bluetooth application 쏅 Touch the symbol in the main menu of the Lucca. The menu Bluetooth Menu is displayed.
Bluetooth function 쏅 Touch the symbol to established the connection (check mark) or to disconnect it (no check mark). Note: The phone numbers selected and answered with the Lucca are stored and displayed in the Call menu next to the keyboard. You can select the phone numbers by touching them. - or 쏅 Touch the symbol to activate the automatic connection (check mark) or to deactivate it (no check mark).
Bluetooth function | Media player Note: The maximum volume depends on the adjusted volume in the cell phone. Touch the button to play the next 쏅 track. Touch the button repeatedly to play the 쏅 current or the previous track. 쏅 Touch the button to end the playback. Activating and deactivating the Bluetooth function 쏅 쏅 Touch the symbol in the menu Bluetooth Menu. The Connect Settings menu is displayed. Touch the symbol to activate (check mark) or deactivate (no check mark) Bluetooth.
Media player Song: Shows an alphabetically sorted list of all music files on your SD/MMC card. 쏅 Touch the respective list entry you want to select. Depending upon the sort, additional lists may be displayed with which you can refine your selection even further. Touch the list entries here that you want to select. If you reached the list with the music files: 쏅 Touch the music file you want to play. 쏅 Touch the Play button. The playback menu is displayed.
Media player Changing to the picture browser 쏅 In the playback menu, touch the More button. A selection menu is displayed. 쏅 Touch the Browser button. The picture browser is displayed. Configuring the slide show You can set the display time for every image in a slide show. 쏅 In the playback menu, touch the More button. A selection menu is displayed. 쏅 Touch the Slideshow Timeout button repeatedly until the desired time is displayed. Note: The time is counted up in increments of five.
Software of the Lucca | Active Cradle Software of the Lucca Reinstalling navigation software For reinstallation purposes, the navigation software of the Lucca and instructions are located on the enclosed CD/DVD. Updating the navigation software To ensure that your Lucca is always state-of-theart, Blaupunkt offers software downloads at regular intervals. They can be found on the Blaupunkt Internet site www.blaupunkt.com. Follow the instructions on the display of the Lucca.
Active Cradle Pin assignment D-sub Active Cradle Pin 1 6 11 5 10 15 Type Description 1 Ignition IN Car ignition signal IN (12V) 2 GND GND 3 GND GND 4 Analog OUT left Audio line OUT left channel 5 GND TMC Return TMC antenna Ground 6 Battery Plus 12/24 V DC Power IN 7 Speed Pulse Signal Continue nav. in case of GPS signal lost (5V) 8 TMC IN Car Audio TMC Signal IN (3.
Technical data Technical data TFT display Active colour matrix, 4 inch, 16:9 diagonal, 480 x 272 pixel Audio Built-in loudspeaker: Mono, 8 Ohm, max 1 Wrms Audio output via Active Cradle: Stereo, Vmax = 1 Veff, Rtyp = 600 Ohm Samsung D600, D820, D908, E258, E788, SGH T509, V720, Z540V • Sony Ericsson K610i, K650i, K700i, K800i, S700i, T610, T637, W850i, W950i, Z608 Edition: 07.2007 Information about which cell phones are currently supported by this device can be found on the Internet under www.blaupunkt.
Disposal of old unit | Service | Warranty Disposal of old unit Warranty (EU countries only) Do not dispose of your old unit in the household trash! Use the return and collection systems available to dispose of the old device. We provide a manufacturer's warranty for our products bought within the European Union. For devices purchased outside the European Union, the warranty terms issued by our respective responsible domestic agency are valid. You can view the warranty terms at www.blaupunkt.
FAQ Frequently asked questions / FAQ The FAQ list contains exclusively answers to frequently asked questions. Information about solving problems or removing malfunctions can be found on the next page in the problem support table. Why does the Lucca require GPS reception? By using GPS satellites, the device determines where it is located and in which direction it is moving. Without GPS reception, navigating with the Lucca is not possible.
Troubleshooting table Troubleshooting table Problem Cause Solution The display remains dark if I The display may temporarily Place the Lucca in the shade for switch on the Lucca. loose its contrast after long and approximately ten minutes and heavy exposure to the sun and switch it on again. high temperatures. The battery is not sufficiently Fully charge the battery. The charged. complete charging time is approx. 5 hours. The battery is always empty.
Troubleshooting table Problem Cause Solution The Lucca has no or only a very The supplied TMC antenna is Connect the TMC antenna to the poor TMC reception. not connected or incorrectly Lucca or align the antenna difaligned. ferently. The TMC reception is currently TMC is currently available in not available in all European Austria, Belgium, Czech Repubcountries. lic Denmark, Germany, England, Finland, France, Italy, Netherlands, Norway, Spain, Sweden, and Switzerland.
Country: Phone: Fax: Germany (D) 0180-5000225 05121-49 4002 Austria (A) 01-610 39 0 01-610 39 391 Belgium (B) 02-525 5444 02-525 5263 Denmark (DK) 44-898 360 44-898 644 Finland (FIN) 09-435 991 09-435 99236 France (F) 01-4010 7007 01-4010 7320 Great Britain (GB) 01-89583 8880 01-89583 8394 Greece (GR) 210 94 27 337 210 94 12 711 Ireland (IRL) 01-46 66 700 01-46 66 706 Italy (I) 02-369 62331 02-369 62464 Luxembourg (L) 40 4078 40 2085 Netherlands (NL) 00 31 24
