Operation Manual

Navigation
25
Deleting a destination
You can delete a destination stored in the Favor-
ites or a last destination:
Touch the symbol in the Manage
Destinations menu.
The Delete Favourite menu is dis-
played.
- or -
Touch the symbol in the Manage
Destinations menu.
The Delete One Last Location menu
is displayed.
Touch the destination to be deleted.
Touch the symbol.
Delete all destinations (last locations only)
You can delete all the last destinations:
Touch the symbol in the Manage
Destinations menu.
A confi rmation menu is displayed.
Touch the symbol to delete the list.
- or -
Touch the symbol to not delete the
list.
Route planning with stages
You can also perform the route planning without
GPS reception, e.g. at home at your convenience,
and gain an overview of your route for your vaca-
tion. The route cannot be stored.
You can use the planned route to:
Start a simulation (see "Route simulation")
Display the route description (see "Route de-
scription")
Jump to a specifi c place on the map (see
"Jumping to a specifi c place on the map")
Note:
You can enter a route with up to 5 route points
and a total length of 5,000 km.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
•
•
•
Entering the starting point
Touch the symbol in the main menu
of the Lucca.
The menu Navigation Menu is dis-
played.
Touch the symbol.
The Route Planning menu is dis-
played.
The starting point is the last known position,
but it can also be changed:
Touch the symbol to change the
starting point.
The Select Destination menu is dis-
played.
Defi ne the route point similar to the desti-
nation entry. For more information, see the
chapter "Entering a destination address".
Touch the symbol in the Detailed In-
formation menu.
The Route Planning menu is displayed again.
The destination entered is listed as the start-
ing point.
Adding additional route points
You can add a route point in the Route Planning
menu or directly on the map:
Touch the symbol in the Route Plan-
ning menu.
The Select Destination menu is dis-
played.
Enter an additional route point.
Touch the symbol in the Detailed In-
formation menu.
The Route Planning menu is displayed again.
The destination entered is listed as route
point.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Lucca_5_3_long_GB.indd 25Lucca_5_3_long_GB.indd 25 01.11.2007 14:11:55 Uhr01.11.2007 14:11:55 Uhr