Operation Manual

26
Navigation
Repeat the steps for all additional destina-
tions (up to 5) to be added to the route.
Note:
After calculating your route, you can add any
city as route point directly on the map:
Touch a city on the map, followed by
the symbol.
The route is being recalculated.
Deleting a route point
In the Route Planning menu, touch the route
point to be deleted.
Touch the symbol.
The route point is being deleted.
Optimising the sequence
In the Route Planning menu, touch
the symbol to switch between the
symbols.
Touch the symbol to automatically
bring the route points into an opti-
mal sequence.
The starting point remains intact.
Changing the order
In the Route Planning menu, touch the route
point to be moved.
Touch the symbol to switch between
the symbols.
Touch the symbol to move the route
point up.
Touch the symbol to move the route
point down.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Start destination guidance
In the Route Planning menu, touch the Start
Navigation button.
The route is calculated and the map displayed.
If you changed the starting point, this symbol
is shown at the top of the map:
Touch the symbol.
The destination guidance is being
started.
Route simulation
Prerequisite:
Route planning and destination guidance
have been started
Touch the symbol in the main menu
of the Lucca.
The menu Navigation Menu is dis-
played.
Touch the button.
The display shows the second page
of the menu.
Touch the symbol.
The map is displayed and the simula-
tion started.
During the simulation, the same information
is displayed and voice instructions are output
as during a destination guidance ("Map dis-
play during destination guidance").
Functions during the simulation
During a simulation, the following buttons are
available:
Stop Simulation
Next Manoeuvre: Omit the next route point
and approach the subsequent destination
쏅
쏅
•
쏅
쏅
쏅
•
•
Lucca_5_3_long_GB.indd 26Lucca_5_3_long_GB.indd 26 01.11.2007 14:11:56 Uhr01.11.2007 14:11:56 Uhr