Operation Manual

Navigation
29
Additional functions during the
destination guidance
The following functions can be used during a navi-
gation:
Blocking route segments
Route description
Jump to a specifi c place on the map
Blocking route segments
During the destination guidance, you can block
the route segment lying ahead of you. An alternate
route is calculated and the blocked partial route is
bypassed.
Prerequisite:
Destination guidance
- or -
Route simulation
Touch the symbol in the main menu.
The menu Navigation Menu is dis-
played.
Touch the button.
The display shows the second page
of the menu.
Touch the symbol.
The Avoid Route menu is displayed.
In this menu, you can select the length of the
blocking, starting with your current position.
Touch a segment length in the Avoid Route
menu.
The route is recalculated and the blocked
route segment is bypassed.
The blocked segment is marked with
the symbol.
You can enter any number of blockings. The
number of blockings is displayed in the bot-
tom display bar.
•
•
•
•
•
쏅
쏅
쏅
쏅
To cancel all blockings:
Touch the symbol.
Route description
You can display the description of your route.
Prerequisite:
Destination guidance
- or -
Route simulation
Touch the symbol in the map dis-
play.
The Display menu is displayed.
Touch the symbol.
The Directions menu is displayed.
Jump to a specifi c place on the map
During the destination guidance or after a route
planning, you can display your current location on
the map or the starting point of the planned route,
the destination area or the entire route.
Prerequisite:
Destination guidance
- or -
Route simulation
Touch the symbol in the main menu.
The menu Navigation Menu is dis-
played.
Touch the button.
The display shows the second page
of the menu.
Touch the symbol.
The Go to ... menu is displayed.
쏅
•
•
쏅
쏅
•
•
쏅
쏅
쏅
Lucca_5_3_long_GB.indd 29Lucca_5_3_long_GB.indd 29 01.11.2007 14:11:57 Uhr01.11.2007 14:11:57 Uhr