Operation Manual

31
Shell, etc. from which you want to
look for points of interest.
Only those subcategories are avail-
able for selection for which points of
interest can be located in the current
vicinity.
➜ Touch the Point of interest
fi eld to select a specifi c
target.
The keyboard is displayed. If you
know a part of the description of
the point of interest, it can be en-
tered here to shorten the list.
➜ Touch the List button.
A list with points of interest ap-
pears. The points of interest dis-
played correspond to the selected
category and subcategory. They
also contain the characters you
entered (if you entered any char-
acters).
➜ Touch the entry of the point of in-
terest to which you want to navi-
gate.
➜ If you desire more detailed infor-
mation about the point of interest,
touch the More button, followed
by Show details.
➜ Touch the OK button to accept the
selected point of interest.
Note:
You do not have to fi ll out the
fi elds Category and Subcategory.
They are only intended to restrict
the list of points of interest in the
Point of interest fi eld. This list can
quickly become very extensive,
particularly at larger locations.
How to save a defi ned destination is
described in the chapter "Saving one
of the Recent Destinations".
Additional Functions
➜ Touch the More button to gain ac-
cess to additional functions of the
Point of interest menu.
The list of Additional functions
displays.
The list of Additional functions con-
tains the following functions:
• Route options:
– Here you can set the route op-
tions for the next navigation.
For further details, please read the
chapter "Specifying Route Options".
Navigation
Lucca_long_2G_eng.indd 31Lucca_long_2G_eng.indd 31 13.04.2006 11:53:42 Uhr13.04.2006 11:53:42 Uhr