Operation Manual

74
• 3D auto zoom
– Select whether you desire auto
zoom or no auto zoom as de-
fault in 3-D view during a navi-
gation.
• 2D auto zoom
– Select whether you desire
low auto zoom, standard auto
zoom, high auto zoom or no
auto zoom during a navigation
with 2-D view.
Note:
For 2-D and 3-D auto zoom, the
zoom depth is changed in refer-
ence to your speed: If you travel
slowly, the scale becomes smaller.
If you travel faster, the scale be-
comes larger. The deeper the auto
zoom, the smaller the scale of the
map.
• 2D-view
– Select whether the map should
be oriented to the north or in
driving direction by default dur-
ing a navigation with 2-D view.
Route Options
In the Routing options menu, you can
defi ne the speed profi le of your ve-
hicle, select the type of routing and
exclude certain streets from usage.
The route options remain valid for
each destination guidance until the
next change of the route options. For
further details, please read the chap-
ter "Specifying Route Options".
Route Planning
In the Itinerary menu, you can defi ne
whether the calculation for the next
stage should automatically be per-
formed after reaching a stage.
If the automatic calculation is activat-
ed, the route to the next stage des-
tination is automatically calculated
upon reaching a stage.
If the automatic calculation is deac-
tivated, you can navigate to the next
stage destination by briefl y touching
any position on the map and select-
ing the Next option.
Confi guring Lucca
Lucca_long_2G_eng.indd 74Lucca_long_2G_eng.indd 74 13.04.2006 11:53:58 Uhr13.04.2006 11:53:58 Uhr