Operating instructions

77
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Risk of injury! If the power-on vol-
ume is set to maximum, the volume
level can be very high when the de-
vice is switched on.
If the volume was set to maximum
before the device was switched off
and the power-on volume is set to
“LAST VOLUME”, the volume level
can be very high when the device is
switched on again.
Severe damage to your hearing can
be caused in both cases!
When you have finished making your
changes,
➮ press the MENU button 9.
Instantaneously decreasing the
volume (mute)
You can instantaneously decrease the
volume (mute) to a level preset by you.
➮ Briefly press button 1.
“MUTE” appears in the display.
Cancelling mute
To return to your previously set volume
level,
➮ briefly press button 1 again.
Telephone audio / navigation
audio
If your car sound system is connected
to a mobile telephone or a navigation
system, the sound system’s volume will
be muted as soon as you “pick up” the
phone or as soon as a navigation an-
nouncement is made. You will then hear
the caller or navigation announcement
over the car sound system’s loudspeak-
ADJUSTING THE VOLUME
ers. In order for this feature to work, the
mobile telephone or navigation system
must be connected to the car sound
system as described in the installation
instructions.
You will need a cable for this with the
following Blaupunkt number: 7 607 001
503.
You can find out from your Blaupunkt
dealer which navigation systems can be
used with your car sound system.
If the sound system receives a traffic
announcement during a telephone call
or whilst a navigation announcement is
being made, you will only be able to hear
the traffic announcement after the call
or navigation announcement is finished
(in so far as the traffic announcement is
still being broadcast). The traffic an-
nouncement is not recorded!
You can set the volume level at which
telephone calls and navigation an-
nouncements will initially be heard.
➮ Press the MENU button 9.
➮ Press the or button 7 repeat-
edly until “VOLUME MENU” ap-
pears in the display.
➮ Press the OK button : to display
the volume menu.
➮ Press the or button 7 repeat-
edly until “PHONE” appears in the
display.
➮ Set your preferred volume level us-
ing the
buttons 7.
When you have finished making your
changes,
➮ press the MENU button 9.