Operating instructions

82
Tuning into ensembles
With DAB, several programmes broad-
casted over the same frequency are
always combined into an “ensemble”.
Note:
● Since various programmes from
different ensembles are stored au-
tomatically in the DABT memory
bank, you cannot use the functions
described here for tuning into an
ensemble whilst the DABT memory
bank is activated.
Selecting an ensemble
You can directly select ensembles that
you have received once already (for this
to work, the ensemble must be receiv-
able).
➮ Briefly press the or button 7.
The name of the next or previous known
ensemble is displayed. The first availa-
ble programme in the ensemble is
played.
Ensemble seek tuning
You can find new ensembles using seek
tuning.
➮ For seek tuning downwards or up-
wards, press and hold down the
or button 7 for longer than two
seconds.
The radio tunes into the next receiva-
ble ensemble. The ensemble name is
displayed briefly. The first available pro-
gramme in the ensemble is played.
Manually tuning an ensemble
You can also tune into ensembles man-
ually.
➮ Press the or button 7 during
seek tuning.
➮ You can now tune the radio manu-
ally using the or button 7.
Selecting programmes
After you have tuned into an ensemble,
you can select a programme from the
ensemble.
➮ Select a programme from the en-
semble using the buttons 7.
Scanning receivable DAB
programmes (DAB-SCAN)
You can use the scan function to play
all the receivable programmes briefly.
Starting DAB-SCAN
➮ In DAB mode, press and hold
down the OK button : for longer
than two seconds.
Note:
● You cannot use the DAB scan
function whilst the DABT memory
bank is activated.
Scanning begins. The name of the cur-
rent programme appears in the top line
and the name of the current ensemble
appears in the bottom line. “SCAN-
NING...” appears in the display whilst
the radio switches to the next ensem-
ble.
DAB MODE