Blaze Portable Manual
Table Of Contents
- USE & CARE GUIDE
- ATTENTION:
- - CONTACT INFORMATION –
- NOTE:
- FOR YOUR SAFETY
- If you smell gas:
- When using your Blaze appliance, please read and follow these basic precautions:
- Have an ABC Fire Extinguisher accessible at all times. Never attempt to extinguish a grease fire with water or other liquids.
- This unit is for outdoor use only!
- Please read all instructions before installing or operating your gas appliance to prevent injury and appliance damage.
- Location of Appliance
- - CONTACT INFORMATION –
- Electrical Safety and Installation Warnings
- Although your Blaze Portable Grill doesn’t use electricity, the following safety instructions and warnings should be followed around the grill and cooking area.
- ATTENTION:
- Gas Safety and Installation Warnings
- Gas Connections
- Cleaning Your Appliance
- Exterior Cleaning
- Flame Tamers, Cooking Grids and Warming Racks
- Cast Stainless Steel Burner
- Drip Tray & Internal Cleaning
- Warning: Due to the compact design of a portable grill, the drippings from cooking accumulate at a faster rate than a full sized grill. The inner body of the grill should be cleaned before each use to eliminate the buildup of grease and potential f...
- BLZ-1PRO-PRT / BLZ-1PRO-PRTMG
- For Your Records:
Blaze Outdoor Products Instructional Book
Page | 15
This Lp appliance may be used with either a standard 20LB., 12 ¼” diameter: 18” high cylinder with right handed
connection threads and this is the maximum size lp tank allowed. By way of the included transition fitting, a smaller
disposable lp tank is permitted. Use only those with a CGA#600 connection and a capacity of either 14.1 oz or 16.4
oz . The cylinder must be marked in accordance with the latest U.S. Department of Transportation specifications for
LP gas cylinders or small tank. (DOT. CFR49 or National Standards of Canada CAN/CSA-B359 Cylinders, Spheres
and Tubes for the Transportation of Dangerous Goods) a Propane Tank with an ODP) Overfill Prevention Device)
must be used at all times.
IMPORTANT: Never connect the appliance to an unregulated gas supply.
The installation of this appliance must conform with local codes or in the absence of local codes, to the national fuel
gas code, ANSI Z223.1a-1998. Installation in Canada must be in accordance with the standard CAN/CGA- B149.2,
Propane Installation Code.
A licensed contractor or local gas company representative must perform all gas connections.
Ensure that the service supplying the appliance is fitted with a shut off valve conveniently positioned near the
appliance and giving ease of access.
The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve during
any pressure testing of the gas supply piping system at test pressures equal to or less than 0.5 psi (3.5 kPa).
The appliance and its individual shutoff valve must be disconnected from the gas supply piping system during any
pressure testing of that system.