Blaze Portable Pedestal Manual

Blaze Portable Grill Pedestal Instructions

Parts Breakdown:

Part Name.

QTY.

Round base assembly ①

1pcs

Post ②

1pcs

Upper fixed plate assembly ③

1pcs

Table top assembly ④

1pcs

M6*12 Allen screw

16pcs

M6 Lock Washer

16pcs

M6 Flat Washer

6pcs

Allen Wrench

1pcs

PAGE 1
Blaze Portable Grill Pedestal Instructions Parts Breakdown: Part Name. QTY.
PAGE 2
Assembly steps: 1. Place ② post over ① round base assembly, attaching them using 5 M6*12 Allen screws and lock washers. 2. Mount ③ upper fixed plate assembly onto ② post, attaching them using 5 M*12 Allen and lock washers. 3. Assemble the ④ table top to the ③ upper fixed plate, attaching them using 6 M5*12 Allen screws, flat washers, and lock washers.
PAGE 3
Mounting base and grill: Note: It is very important that the grill base be mounted securely to the surface it sits on. Use the appropriate fasteners (not included) for the material you are securing to. The grill’s feet install into the 4 rectangular openings on the corners of the table top assembly. Once in place, secure the feet to the table top assembly by tightening the 4 foot securing handles.