Operation Manual

ManualsBrandsBlendtec ManualsHouseholdPROFESSIONAL 800

PROFESSIONAL

SERIES

OWNER’S MANUAL AND USER GUIDE

Summary of content (12 pages)

PAGE 1
PROFESSIONAL SERIES OWNER’S MANUAL AND USER GUIDE 1
PAGE 2
TABLE OF CONTENTS SECTION 1 - IMPORTANT SAFEGUARDS ��2 SECTION 2 - UNPACKING ��4 SECTION 3 - GETTING TO KNOW YOUR BLENDER ��4 SECTION 4 - INSTALLATION & OPERATIONAL OVERVIEW ��5 4.1 - PROFESSIONAL 750™ ��5 4.
PAGE 3
SECTION 1: IMPORTANT SAFEGUARDS IMPORTANT INFORMATION Read all instructions carefully before using your Blendtec® blender. Following these instructions will help prevent injuries and damage to the machine and will ensure that you have the best possible experience with your new blender. 1.1 AVOID CONTACT WITH MOVING PARTS • ALWAYS keep fingers, hands, hair and clothing away from all moving parts.
PAGE 4
SECTION 2: UNPACKING SAVE ALL PACKAGING MATERIALS AND INSTRUCTIONS FOR FUTURE USE 2.1 UNPACKING YOUR BLENDER You should have received the following items: • Professional series blender motor base • Blender jar with lid Additional literature may be included depending on package configuration. 3.2 BLENDER JAR ASSEMBLY The blender jar assembly consists of the blender jar, blade assembly, and lid. • Jar: The jar is durable, BPA-free, and easy to clean.
PAGE 5
FIGURE 1: BLENDER JAR ASSEMBLY Clear Vented Cap Insert Lid Countertop Hole Template: Jar Blade Assembly 5 7/8” (149.22 mm) FIGURE 2: MOTOR BASE Blender Drive Socket Motor Base Cover Touch Pad LCD Information Center Motor Base Housing Power Switch 4 3/8” (111.
PAGE 6
4.1.2 QUICK RECIPE INSTRUCTIONS – USE THESE STEPS TO GET STARTED RIGHT AWAY. BATTERS 3. Load the blender jar as indicated in the recipe. This cycle stays at relatively low speeds for shorter periods of time. This combines your batters, allowing the flavors to blend together properly, without over-mixing. To use the Batters cycle, load your jar as indicated in the recipe you are using, secure the lid, and press the Batters icon The blender will run the cycle and automatically shut off. 4.
PAGE 7
4.2 PROFESSIONAL 800™ FIGURE 7. BLENDER DIMENSIONS 4.2.1 INSTALLATION 1. Select a location for the blender that is near an electrical outlet and which allows enough room above and around the unit to allow for unobstructed movement of the sound enclosure (see Figure 5 for measurements). 2. Place the blender on a flat, clean, and dry surface. Blender vents on the sides and exhaust on the back should be unobstructed to allow proper cooling during use. 3.
PAGE 8
4.2.4 ALL ABOUT BLEND CYCLES Blend cycles are timed cycles designed for specific types of blends. These one-touch cycles speed up, slow down and shut off automatically, so results are perfect every time. This cycle is designed to completely blend tough and dense ingredients, including carrots, celery, and seeds. Use the Whole Juice cycle if you are using any fruits and/or vegetables with stems, seeds, or skins.
PAGE 9
5.3 CLEANING TIPS AND CAUTIONS • Do not use stiff bristled brushes or abrasive cloths/pads to clean the blender base or jar as this will dull or scratch the surface. • NEVER submerge the blender motor in water. Avoid submerging blender jars for more than 5 minutes. Water penetration through the lower jar seals will reduce he life of the jar. After cleaning, we recommend the blender jar be stored upright. • BLENDER JAR IS DISHWASHER SAFE—TOP RACK ONLY! • Extreme temperatures damage the lower seal of the jar.
PAGE 10
6.3 NOISE LEVEL CHANGES If the blender noise level has increased from original levels, determine whether the sound is coming from the blender motor or jar. • Blender Motor: Remove the jar, and press Pulse. Listen to the motor. If it is excessively noisy, please contact your Blendtec Service Agent for evaluation. • Jar: After checking the motor, place the jar back on the motor. Run the motor for a few seconds using the Pulse button.
PAGE 11
UNDER WARRANTY 1. Contact Blendtec immediately to diagnose the difficulty. Please have the blender serial number ready as well as a description of the problem. Do not attempt to do your own repairs. Repairs made by persons other than Blendtec authorized service representatives will void the warranty. Many issues can be resolved simply and quickly over the phone. 2. If the difficulty cannot be resolved over the phone, your unit may require replacement.