Owner’s Manual and User Guide
Table of Contents SECTION 1 - IMPORTANT SAFEGUARDS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5 SECTION 2 - UNPACKING � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7 2.1 UNPACKING YOUR BLENDER 2.2 RECORDING YOUR SERIAL NUMBER AND DATE OF PURCHASE SECTION 3 - BLENDER OVERVIEW � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8 3.1 BLENDER MOTOR 3.
SECTION 1 – IMPORTANT SAFEGUARDS IMPORTANT INFORMATION Read all instructions carefully before using your Professional Series blender. CERTIFICATIONS The blender is certified by ETL (Report No. 3018204-4, 3018204-2 & 3018204-3) to comply with UL Standard 982, 6th ed, 6-19-2009, and to CSA C22.2 No. 195-M1987 2004 The Professional Series and its accessories are certified by NSF International (NSF) under the letter K (for K-TEC) in the NSF Official Listing.
1.6 NEVER OPERATE THE BLENDER WITHOUT THE LID IN PLACE 1.7 N EVER OPERATE THE BLENDER USING ATTACHMENTS NOT SOLD BY BLENDTEC 1.17 THE BLENDTEC PROFESSIONAL SERIES IS INTENDED FOR HOME USE ONLY. ANY COMMERCIAL USE VOIDS ALL WARRANTIES. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE The use of any unauthorized attachments may cause fire, electric shock, and/or injury and will void the warranty. 1.8 JAR MUST BE PROPERLY IN PLACE WHILE APPLIANCE IS OPERATING SECTION 2 – UNPACKING 1.
SECTION 3 – BLENDER OVERVIEW FIGURE 1: BLENDER JAR ASSEMBLY Get to know your Blendtec Professional Series 3.1 BLENDER JAR ASSEMBLY (see Figure 1) Clear Vented Cap Insert Lid • The lid is made from flexible rubber to seal liquids within the jar during blending. • The clear vented cap insert allows heated air to escape and enables ingredients to be easily added. • The jar is made from BPA-free Tritan™ copolyester to provide maximum strength and clear visibility.
SECTION 4 – INSTALLATION 4.1 ABOVE-COUNTER INSTALLATION 1. Place blender on a flat, clean, and dry surface. 2. Ensure that the unit is turned off before plugging it into a separate 120-volt outlet. 3. Ensure that blender vents are unobstructed to allow proper cooling during use. FIGURE 3 4.2 IN-COUNTER INSTALLATION Preparation 1. Identify the best place to install your blender. Consider proximity to ingredients, available counter space and access to a power outlet. 2.
SECTION 5 – CARE AND CLEANING 5.1 AFTER-USE CLEANING 1. Add 1 cup (240 ml) of hot water and a drop of liquid dishwashing soap to the jar. 2. Place the lid tightly onto the jar. Place the jar on the blender base and, with your hand placed on top of the lid, press the pulse button for 5 seconds. 3. Rinse with clear water until all soap is rinsed from jar and lid. 4. Clean the blender base by simply wiping the base and touchpad with a damp cloth. 6.
6.3 ALL ABOUT BLEND CYCLES (see Figure 6 page 16) 1. WHY BLEND CYCLES? In the world of professional blending, many factors go into making delicious blends time after time. In order to blend many different recipes consistently well, Blendtec developed blend cycles to match various blending needs. Because different ingredients have different blending characteristics, each item needs to be considered. Thicker or more fibrous ingredients take longer to blend and must be blended at higher speeds.
FIGURE 6 Ice Cream SPEED SPEED Batters (23 seconds) 14s 3s 4s 27s 3s 15s 2s TIME (in seconds) TIME (in seconds) Whole Juice (50 seconds) SPEED SPEED Ice Crush (35 seconds) 15s 10s 10s 10s TIME (in seconds) 3s TIME (in seconds) 16 20s 16s Soups SPEED SPEED 24s 3s 2s 2s TIME (in seconds) Smoothie (40 seconds) 10s (45 seconds) (90 seconds) 85s 3s 2s TIME (in seconds) 17
SECTION 8: WARRANTY US AND CANADA Your Name: ____________________________________________________________ WARRANTY DESCRIPTION (US Domestic and Canada) Address: _______________________________________________________________ The motor base and jar assembly, including all moving jar parts, are covered against leaking or breakage for the warranty period. Warranties begin from date of purchase.
1206 South 1680 West Orem, Utah 84058 U�S�A� 1-801-222-0888 blendtec�com ©2011 K-TEC, INC�, All Rights Reserved� Blendtec is a registered trademark of K-TEC, INC� OWN-RE-028 Manual, Professional Series Rev 01