TotalBlender .......................................
Table of Contents SECTION 1 - IMPORTANT SAFEGUARDS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1 SECTION 2 - UNPACKING � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3 2.1 UNPACKING YOUR BLENDER 2.2 RECORDING YOUR SERIAL NUMBER AND DATE OF PURCHASE SECTION 3 - TOTAL BLENDER OVERVIEW � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 3.1 BLENDER MOTOR 3.
SECTION 1: IMPORTANT SAFEGUARDS IMPORTANT INFORMATION Read all instructions carefully before using your Total Blender™. This important information has been provided as required by the North American standards indicated below. Following these instructions will help prevent injuries and damage to the machine and will ensure that you have the best possible experience with your Total Blender. 1.1 SAFETY CERTIFICATION The Total Blender is certified by ETL (Report No.
1.4 NEVER OPERATE THE BLENDER IF IT APPEARS DAMAGED If the blender malfunctions, call your service agent first. If it is dropped or damaged in any way, return the blender to a Blendtec service agent immediately for examination, repair, electrical or mechanical adjustment, or possible replacement. 1.5 NEVER OPERATE BLENDER IN LIQUID To protect against the risk of electrical shock do not put the motor base in water or other liquid. Do not use the blender outdoors where it is subject to precipitation. 1.
• Additional literature may be included depending on package configuration. 1. Remove blender motor base, blender jar, and lid from packaging. 2. Unwind the power cord. 3. Check for any packing material that may have blocked ventilation holes on the underside of the blender motor base. 4. Inspect all items to ensure no damage occurred during shipment. 5. If any damage has occurred contact your Blendtec service agent immediately. 2.
SECTION 4: INSTALLATION 1. Place the blender on a flat, clean, and dry surface. 2. Make sure a plug outlet is available within two feet of the blender motor. 3. Ensure the unit is turned off before plugging it into a separate receptacle. 4. Ensure that blender vents are unobstructed to allow proper cooling during use. 5. Turn unit on. 6. Place appropriate filled blender jar, with lid in place, onto blender base. then shut off automatically after 50 seconds.
FIGURE 4 Ice Cream, Frozn Yogurt (45 seconds) 27s 20s 16s Smoothie (40 seconds) 85s 24s 3s 10s 8 3s 9
blend at higher or lower speeds for different lengths of time in order to produce the most consistent results. However, things like the temperature of ice and the amount of liquid in the various foods used in a recipe will create different blending characteristics. The Total Blender recipe book is designed for an overall average in terms of ice temperature and the amount of liquid typically contained in various fruits and vegetables.
• Blender Motor: Remove the pitcher and press the Ice Crush or Soup button. Listen to how the motor sounds. If it is excessively noisy, contact your Blendtec service center for evaluation. • Jar: After checking the motor, place the jar back on the motor. Run the motor for a few seconds using the Pulse button. (If you have more than one jar, test a different jar to determine whether the sound is different.
OUT OF WARRANTY 1. Contact Blendtec to diagnose the difficulty. Please have the blender serial number ready along with a description of the problem. Do not attempt to do your own repairs. Many issues can be resolved simply and quickly over the phone. 2.
1206 South 1680 West Orem, Utah 84058 U�S�A� 1-801-222-0888 blendtec�com ©2011 K-TEC, Inc�, All Rights Reserved� Blendtec is a registered trademark of K-TEC, Inc� OWN-RE-025 Manual, Total Blender v10 Oct� 11
