Item Brochure

11
Notes Continued
CLOSED CASE CARTS:
- Body: One piece top and one piece body. Sound deadening angle welded
under the top. Sound deadening channel on the center back. A pan shaped,
step down bottom with a slope that facilitates draining. Horizontal intersections
filled with heat resistant silicone. The body shell is bolted to the chassis. A tubular
push handle is provided at one end of the cart.
- Doors: Double walled, channel enforced, (double or triple) hinged doors with
paddle latch pulls on leading edges. Doors less than 36” high swing on two
hinges, while doors greater than 36” high swing on three hinges. All doors
permit full 270° swing. In fully opened position, positive spring acting clips at
the cart ends capture doors for cart washing or operating room use.
- Shelves: Shelves slide on adjustable stainless steel wires, suspended from
keyhole punched standards welded to the cart interior.
OPEN CASE CARTS:
- Frame: U-shaped tubular framing formed around 3” radii or tubular corner
posts stabilized and capped by a pan shaped top welded to posts at contact
points. Posts are fitted with casters and either rolling bumpers or encircling
rubber bumpers.
- Tops, bottoms, fixed shelves: Fabricated with turned down edges, either
hemmed or flanged, with corners notched to sit over or snuggly against the
inside contour of the upright members. Notched corners are fully welded to
the uprights the full height of the facing edges as well as around the notch.
- Adjustable shelves: Solid rods welded between the tubular uprights at each
end, stabilizing the framing members while providing varying levels of shelf
adjustment.
Case Carts
Construction
Specifications
Custom Designs Available Upon Request
Please email us at [e-mail]