Cordless CellularFabric Shade owner's handbook
WARNING Young children can STRANGLE in cord and bead chain loops. They can also wrap cords around their necks and STRANGLE. • Always keep cords and bead chains out of children’s reach. • Move cribs, playpens, and other furniture away from cords and bead chains. Children can climb furniture to get to cords. • Do not tie cords together. Make sure cords do not twist together and create a loop.
INSTALLATION INSTRUCTIONS Step 1. Check Package Contents Missing part? Call 800-933-7115 Mounting hardware kit includes the following: Part Quantity a Mounting Brackets 2 (for 18” to 36” wide shades) 3 (for 36” to 48” wide shades) 4 (for 48” to 72” wide shades) 5 (for 72” to 96” wide shades) b 11/8” Screws 2 per bracket c.
Lift the head rail into position such that the inner front edge of the head rail slides into the slot at the front of each bracket. Push the head rail upward until the flexible tab at the bottom of each bracket snaps onto the back of the head rail. Check carefully to assure that each bracket is properly secured. For Outside Mounting: Clip the brackets onto the head rail as described above. Hold the shade level at the height desired and center it over the window opening.
Cellular& Semi-Cell Step 5. How to Operate Standard Shade To raise or lower the shade, pull the lift cords down and toward the center of the shade to release the cord lock. Adjust the shade to the desired height, and then move the lift cords toward the outside of the shade to lock in place. Top-Down Bottom-Up Shade The cords on the right side of the shade control Bottom-Up/Down function. The cords on the left side control Top-Down/Up function. Operate the cords as described above.
CLEANING The vinyl head rail and bottom rail can be wiped clean with a damp sponge. To clean the shade fabric, use a feather duster or vacuum lightly using the soft brush attachment.