User Manual

5
Woven
NaturalShade
INSTALLATION INSTRUCTIONS
Step 1. Check Package Contents
Missing part? Call 1-800-264-1190
Mounting hardware kit includes the following:
Part Quantity
a Mounting Bracket 2 (up to 54” wide)
(includes washer & 3 (55” To 72” wide)
wing nut)
b 1¼” Screws 4 per bracket
c wall anchors 4 per bracket
(For dry wall or
plaster mounting)
d Cord Cleat 1
e 1” Screws 2 (for cord cleat)
Note: one extra screw of each noted size is included for convenience
Step 2. Tools Required
Screwdriver, tape measure, pencil, drill, step ladder
Use a ⁄” drill bit to predrill screw holes.
Use a ¼” drill bit for wall anchors.
Step 3. Bracket Location and Installation
Your blind may be installed either inside the window frame or
outside the window frame.
For Outside Mounting:
Place a bracket on both ends of the head rail (and one in the center
for larger shades).
Hold the shade level at the height desired and center it over the
window opening - mark the exact location of each bracket with a
pencil.
Remove the brackets from the head rail and position each bracket
at the marked location and screw each bracket into the wall or
window molding using the 1¼” screws.
Woven
NaturalShade