Installation guide

BlipNode Configurations
47
folder /opt/blipnet/Obex/OPP. However, this folder can be changed, see the BlipServer
Properties - Advanced section.
If the OPP server should answer with your business card (instead of the BlipNet Business card)
when requested from OPP clients, follow the steps described below:
1. Create a business card, e.g. by using Microsoft Outlook. The official site of vCard is
www.imc.org/pdi/, where the format is described.
2. Replace the default Business card located in <blipnet install
folder>\properties\default.vcf with the one created in step 1.
Devices doing Business Card Exchange or Business Card Pull will now receive your Business
Card.
FTP Server
The File Transfer Profile (FTP) Server give users access to a Bluetooth Obex Based FTP Server.
With a dedicated Obex FTP Client on a remote terminal, users will be able to read, write,
create and delete files and folders in a root folder specified in the BlipServer.
A BlipNode can be used as a FTP Server without writing any specific application. The File
structure will, by default, be placed in the folder <blipnet install folder>/Obex/FTP. However,
this folder can be changed, see the BlipServer Properties - Advanced section.