Manualshelf

Installation guide

ManualsBrandsBLIP ManualsAntennaNode L2i
51525354555657585960
Configuration Wizard
51
BlipNode Accessibility
The second step in the configuration wizard is the BlipNode Accessibility step. Via this window
settings regarding accessing the BlipNode can be configured.
Discoverable
If checked, the BlipNode will be discoverable (other Bluetooth devices can discover the
BlipNode).
Inquiry Access Code
Configures the Access Code that the Bluetooth Radio will listen for during inquiry scan. This
must always be set to General Inquiry Access Code (GIAC).
Connectable
If checked on, then the BlipNode will be connectable (other Bluetooth devices can establish a
connection to the BlipNode).
Role Change
The field can have the values:
Not
required
When this value is used the BlipNode will not force master/slave
switch. This setting shall be used when it is known that only one
device is connected to the BlipNode at the time.
Required
When this value is used the BlipNode will require all connecting