User Manual

2
An extra support is guaranteed by two adhesive bands on the sides
of the film. These are especially useful for those smartphones with a
dull surface (eg Iphone 6). Beware of intensive use: dust and dirt
may decrease the adhesive capacity of the bands. In any case,
replacement adhesive tapes are available.
For those smartphones which have the camera in a corner of the
body, Blips ideal positioning requires that the longer end, the one
with the writings, goes on the front of the phone, as can be seen in
the following images:
Be careful not to create air bubbles between camera and lens.
A simple test that can be done to verify the correct application of
the lens involves your index finger: if you lay it against the lens and
then move it away gradually, at some point you should find the ideal
focal length where the images appear correctly in focus. In this case,
the details of the fingerprint should be distinguished: