Owner Manual

PAGE
9
JOINING TWO ADJUSTABLE BASES
If any split setup is being installed, plastic
connecting straps are provided (one per base) to
secure the bases together. Use both straps to secure
the head and foot portions together.
With the bases in their desired location, slightly
loosen both legs to allow the strap to t on the leg
bolt, between the leg washer and frame.
(A)
(B)
JOINING TWO ADJUSTABLE BASES
Slide side (A) of the connecting strap onto leg bolt.
Swing the strap and connect side (B) to the leg bolt.
Secure the strap by shifting to the left.
Re-tighten legs. Do not over tighten. Use the
remaining strap and repeat on other end of the base.