Owner Manual

PAGE
10
The legs must be a minimum of 6” to maintain
articulating clearance and must not exceed 12”;
anything taller is considered unstable.
VIOLATING ANY OF THE SAFETY GUIDELINES MAY RESULT IN
DAMAGE OR INJURY, VOID THE WARRANTY FOR IMPROPER USE
AND MAY CAUSE DAMAGE TO THE FLOOR.
LEG ASSEMBLY
Locate the legs and choose one of the heights.
Make sure the leg with the solid end is touching the
oor. Screw six legs into the pre-drilled holes by
hand. All legs must be installed and resting evenly
on the oor. The base will not operate properly
without the legs.
LEG ASSEMBLY