COLOR User’s Guide Manufactured by: BlissLights Phone: 1-888-868-4603 www.blisslights.com support@blisslights.
TABLE OF CONTENTS Notice ..............................................................................................................................1 Introduction ..................................................................................................................2 Before You Begin..........................................................................................................2 Parts List................................................................................................
NOTICE CAUTION—Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This laser product is certified as a CLASS 3R laser product, and adheres to the requirements of the US Federal Laser Product Performance Standard (FLPPS) contained in the regulations in 21 CFR Subchapter J. Avoid direct eye contact of CLASS 3R laser energy as it can be hazardous.
INTRODUCTION Thank you for purchasing the BlissLights laser projector. This laser projector is a unique indoor/outdoor light fixture that uses a mixture of LED lighting with a new laser and holographic technology to project thousands of pin-points of light. See the “fireflies” dance in your garden, create a fun and mesmerizing ambience indoors, or add some extra allure to your holiday display. We hope you enjoy this incredibly unique lighting experience.
SETTING UP THE LASER PROJECTOR Before operating your laser projector, please read the “Before you Begin” and “Notice” sections of this user guide. 1. Connect the light fixture to the provided power supply and screw on the attached water seal cap to the top of the power supply. 2. Connect the power supply into an available standard electrical outlet. 3. Attach the stake or stand to the fixture head by twisting the fixture clockwise. Remove the stake or stand by twisting the fixture counter-clockwise. 4.
OPERATING THE REMOTE CONTROL Use the included infrared remote control to operate the light’s features. Infrared signal does not go through solid objects, such as windows, walls, trees, shrubs, etc. Make sure there is a clear line of sight between you and the fixture. Point the remote control at the FACE of the light fixture, where the receiver is located. The remote operates up to 15’ (4.6 m) of unobstructed distance away from the face of the fixture. Direct line of sight 15’ (4.
PRECAUTIONARY TIPS FOR THE REMOTE CONTROL t t t The remote control should be kept dry and away from heat sources. Avoid humidity. If the device responds erratically to the remote control, or doesn’t respond at all, check the battery. Do not subject the remote control to undue physical stress, such as striking or dropping it. Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp, soft cloth when cleaning.
PRODUCT SPECIFICATIONS Dimensions 330 x 127 x 102 mm 13 x 5 x 4” Cord length: 6 m / 20’ Housing ABS Laser Classification Class 3R Laser Wavelength Red—650 nm, Green—515 nm, Blue—445 nm, Purple—405 nm LED 10 W, with 16-color selection Maintenance Maintenance free Power Consumption 5-8 W (Laser) 10W (LED) Power Supply Input 110 V AC (with provided UL/CUL power supply) Light Input 12 VDC Operating Temperature -22°F to 85°F (-30°C to 29°C) Operation Indoor/outdoor Projection Coverage Up t
TROUBLESHOOTING How to avoid IR interference: If the laser or LED start and stop randomly, there is a wireless signal interference (i.e. radio control toys, remote controls for TV or entertainment systems, automatic vaccuums, etc.). To verify if this is the case, please try covering the window at the bottom of the front lens with your finger to block stray infrared signals from entering the fixture.
LIMITED WARRANTY This limited warranty is provided by BlissLights LLC, San Marcos, California, U.S.A 92069 (“BlissLights”). BlissLights warrants that BlissLights’ lighting products (the “Product”), when delivered in new condition and in its original packaging, will be free of defects in material and workmanship for a period of ONE (1) YEAR from the date of original purchase.
