MOTION User’s Guide Manufactured by: BlissLights Phone: 1-888-868-4603 www.blisslights.com support@blisslights.
TABLE OF CONTENTS Notice ..............................................................................................................................1 Introduction ..................................................................................................................2 Before You Begin..........................................................................................................2 Parts List................................................................................................
NOTICE CAUTION—Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This laser product is certified as a CLASS 3R laser product, and adheres to the requirements of the US Federal Laser Product Performance Standard (FLPPS) contained in the regulations in 21 CFR Subchapter J. Avoid direct eye contact of CLASS 3R laser energy as it can be hazardous.
INTRODUCTION Thank you for purchasing the BlissLights Spright Motion. The BlissLights Spright Motion is a unique indoor/outdoor light fixture that uses new laser and holographic technology to project thousands of moving pin-points of light. See the “fireflies” dance in your garden without the need for wind, create a fun and mesmerizing ambience indoors, or add some extra allure to your holiday display. We hope you enjoy this incredibly unique lighting experience.
SETTING UP THE BLISSLIGHTS SPRIGHT MOTION Before operating your Spright Motion, please read the “Before you Begin” and “Notice” sections of this user guide. 1. Connect the light fixture to the provided power supply. 2. Connect the power supply into an available standard electrical outlet. 3. Attach the stake to the fixture head by twisting the fixture clockwise. (Remove the stake by twisting the fixture counter-clockwise. 4.
BATTERY INSTALLATION - REMOTE CONTROL 1. Remove battery compartment cover. 2. Insert two AAA batteries (included) into the remote control. Note: Make sure to match the (+) and (-)symbols on the batteries with the (+) and (-) symbols inside the battery compartment. 3. Re-attach the battery compartment cover. Note: For best results, use only alkaline batteries. PRECAUTIONARY TIPS FOR BATTERY INSTALLATION t t t t t t t t t t t t t Do not ingest the batteries.
USING THE REMOTE CONTROL Power Button - Press to turn on or off. + Button – Press to increase the speed of the star field’s rotation. - Button – Press to decrease the speed of the star field’s rotation. INCREASING AND DECREASING THE LIGHT ANIMATION SPEED Press the (+) or (-) buttons on your remote to increase or decrease the light animation speed. The light projection will blink ONCE after each speed-setting change and TWICE after it has reached the fastest or slowest speed-setting.
INSTALLATION TIPS t t t t t Do not connect the light to a dimmer pack, as a dimmer accessory may damage the laser component. Use only the manufacturer-provided power supply. Limit the use of extension cords. If you need an extension cord, use only UL, CUL, or CSA approved 3rd party extension cords. When using outdoors, ONLY use extension cords that are weather resistant, such as waterproof cords. The darker the display area, the brighter your projection will appear.
TROUBLESHOOTING How to plug-in your laser projector: 1. Locate the two-copper socket inside the power supply provided. TWO-COPPER SOCKET 2. Locate the two-prong side of the cord that comes with the fixture and align directly to the two-copper socket. Insert directly. TWO-PRONG 3. Secure the water seal and plug it in into any standard AC outlet to turn on the laser projector.
LIMITED WARRANTY This limited warranty is provided by BlissLights LLC, San Marcos, California, U.S.A 92069 (“BlissLights”). BlissLights warrants that BlissLights’ lighting products (the “Product”), when delivered in new condition and in its original packaging, will be free of defects in material and workmanship for a period of ONE (1) YEAR from the date of original purchase.
