Instruction Manual

Page 3 of 29

WARNING-All images and text in this manual is the property of Blitz Co., Ltd. (Japan).

No part of this manual may be reproduced, stored in retrieval systems, or transmitted in any way

without prior written permission of Blitz Co., Ltd. (Japan).

8) DO NOT damage any wiring(s) and (or) piping(s) from the engine room while installing this product.

It would cause a fire by an electric short, breakage to the engine, vehicle and (or) to the electronic part(s).

Insulate the unnecessary wiring(s) for the installation.

[WARNING]: Ignoring these indications may cause injuries and malfunctions (breakage) to the product.

1) Ask for a professional or a technician to perform the installation of this product.

The individual performing this installation must have technical skills and knowledge to perform this installation.

2) Do not drop or insert extreme force to the product while installing it.

It would cause malfunctions.

3) Do not misuse, abuse, alter, take apart and (or) modify this product in any way.

It would cause an accident, fire, electrocution, breakage and (or) burn the electronic parts..

If any of the above indications are executed, the warranty of the product will be voided.

4) Do not install this product at a location where it could get wet and (or) highly heated

It would cause an electrocution, fire, and break and (or) burn the electronic parts.

5) Do not install this product while the engine and its components are hot; wait until they are fully cooled.

It would cause burn(s) to you or to a third party if the engine, radiator, and the exhaust system are hot.

6) Please perform regular maintenance and be extra cautious.

This product’s durability and components are thoroughly tested; however, depending on the vehicle’s driven

condition and (or) climate, the durability may decrease.

7) Do not throw away the original detached components from the vehicle. Please keep the components

securely.

We are not liable from any damages caused to the components while installing it. Please be extra careful

through the installation.

8) Use the right tools to tighten the nuts and bolts.

It will damage the threads if you over tighten it or by using the wrong tools.

9) This product has been designed and tested on vehicles with manufacturer’s original components.

It would cause malfunctions to the product or vehicle if you have already installed a third party’s product(s).

Online Manual Not For Resale Purposes