User guide

Instruction Manual
Thank you for purchasing BLITZ product. Please read this instruction manual, the vehicle’s
service manual and wiring diagram before installing.
When this product or the vehicle equipped with this product is given/rent to others,
please hand this manual to the person who receive the product or vehicle.
An immediate possibility of serious injury and (or) even death can be assumed to the individual and
(or) to the third party if this indication is ignored and wrongful usage and (or) operation is operformed.
Symbol legend
Attention
Wear protective glass and gloves.
Danger
！
Warning
！
Caution
！
Read this first
Danger
！
Warning
！
Caution
！
Attention
Warning
！
Caution
！
Attention
NOTE
This instruction manual includes the usage and installation
Read this manual thoroughly before any operation. BLITZ cannot be responsible for any injury or damage to the individual or third party
or malfunction of the vehicle, products and (or) accessories.
Please keep this instruction in the vehicle all the time.
This product includes the parts listed in the parts list in this instruction manual. If you find missing or damaged parts,
please contact your local retailer.
BLITZ cannot be responsible for any loss or damage to the product or the vehicle, when used in combination with other product and (or)
modification to this product.
BLITZ cannot be responsible for any injury, damage or malfunction to the individual, third party or vehicle due to usage of this product
and (or) accessories.
This product uses high intensity LED (Light Emitting Diode). Brightness and color can vary due to manufacturing process of LED.
This product and accessories can be changed without prior notice notice due to BLITZ production reason.
■
■
■
■
■
■
■
Any service to the car with removal of the parts shoulod be performed by professionally trained mechanic at properly equipped workshop.
Resting, sleeping in the car, or working in the car or in the closed garage can cause carbon monoxide poisoning, which can be fatal.
Must turn the engine off and keep the area well ventilated.
Always place wheel chock to prevent the vehicle from moving.
Be careful with wiring when making connection to directly in relationship with driving equipment, such as engine, steering, brake, and air-bag.
Always make sure to have 30A or lower capacity fuse/fusible link on the power supply line when making connection to such wiring.
Over 30 A fuse can stay alive without fusing and cause a vehicle fire.
Always make sure that the wiring is done properly. Must not make mistake with positive and negative polarity, Make sure that the wires are
insulated, and there is no loose wire,
If the wiring is done wrongly, it may cause a fire on this product and/or the vehicle.
Must disconnect the battery terminal wires before installing. In case if it is not possible to shut off the power supply, it is your own responsibility
to protect yourself from any injury as well as avoid electric shock and/or short circuit which can cause damage to the product and/or the vehicle.
■
■
■
■
■
■
Exhaust manifold, radiator, engine unit can be very hot. Must wait until cool enough not to get burnt before installation.
Exhaust manifold, radiator, engine unit can be extremely hot while engine is running or right after engine is shut off.
There is high possibility of severe burn in case of contact with such components.
Be careful with baby, small children, and pets. Keep small parts away to avoid accidents. (prevent the parts from being swallowed/inhaled)
Exhaust pipe can be very hot. Watch out the clothing/skin from being burnt, especially loading/unloading the baggage from rear trunk/hatch.
Avoid to install this product from the area which can interfere with the front view area, driving equipments, and/ or air-bag system
and other safety features..
Be careful when installing this product near elecrtic wires, water hoses, and air hoses, to avoid damage them.
Damaging the electric wires, water hoses, and air hoses can cause shot circuit and/or enging damage.
■
■
■
■
■
■
Dropping and/or applying the excessive force to this product before or when installing can cause the damage to this product, resulting in
mulfunction of the product.
This product is designed to be used in 12V power supply vehicle. Do not install this product in different voltage supplied vehicle.
Make sure to insulate the unused connector and wirings to avoid short circuit.
Always use the supplied wiring. If it is neccessary to use different wiring, be careful with voltage/ampare capacity and strengh of the wiring.
Do not pinch the wire between the body and/or interior panel to avoid the damage to the wiring.
Keep the wirig away from the noise source such as ignition signal, radio, HID system, navigation system, Television.
Also, keep the wirig away from the heat source such as turbocharger.
Such noise/heat can cause this product to work improperly or damage to the product.
Keep the wiring near the sensor and connector with minimum bend to avoid the damage to the wiring.
Make sure to release the latch when removing the connector. Pull on the connector, not the wiring.
Installing on the panel on the passenger side or center section can interfere with safety standard. Please refer to your local law in your contry.
Use soft cloth to clean product gently. Using cleaner agent or abrasive agent can damage the product.
■
■
■
■
■
■
■
■
■
■
BLITZ cannot be responsible for any lost factory stock parts temporary removed in process of installation.
Some components such as car audio and clock can lose memory when the battery is disconnected while product installation.
After the installation is complete, recover the setting refering to each instruction manual. BLITZ cannot be responsible for lost settings.
Perform periodical inspection. The durability of this product can vary depending the surrounding condition.
BLITZ cannot be responsible if the factory warranty is void due to installation of this product.
■
■
■
■
Installing by non-professional shop voids product warranty.
Staying focused on this product while driving is very dangerous, leading to accident.
Perform meter setting and other operation when the vehicle is parked at safe place.
Do not disassemble or apply any modification to this product. Such alteration can cause accident or product damage, also voids warranty.
If any problem is found (Got wet/odor/smoke/erratic movement etc.), stop using the product IMMEDIATELY and contact your local retailer.
Prolonged usage with such symptom can lead to accident or vehicle damage.
■
■
■
■
■
BLITZ cannot be responsible for any damage while using this product, or damage caused by this product usage.
Do not apply excessive force to this product. Especially pulling on the while the connector is latched can easily damage the wire.
■
■
Displayed value on this is for reference. Refer to factory meter while driving.■
An potential possibility of serious injury and (or) even death can be assumed to the individual and
(or) to the third party if this indication is ignored and wrongful usage and (or) operation is operformed.
An potential possibility of serious injury can be assumed to the individual and
(or) to the third party if this indication is ignored and wrongful usage and (or) operation is operformed.
An potential possibility of a malfunction and (or) breakage can be assumed to the product and
(or) to the vehicle if this indication is ignored and wrongful usage and (or) operation is operformed.