User Manual

Bolt

(C. 8)

Alternator

bracket

The thinner

side

towards the

belt

(C. 10)

(Part.ｊ) Bolt

(Part.ｓ) Washer

Collar

(C. 8)

Alternato

(C. 10)

Cooler

Compressor

Collar

(C. j) Bolt

(C. s)

(C. 56)

Cooler harness

(2) Transfer of the A/C compressor.

⑤ Connect the extended harness, in step

②, to the compressor connector.

④ Install temporarily the A/C compressor

using the (C. 8) alternator bracket, (C.

10) cooler collar (2P), (C. 11) cooler

collar B (3P) 、(C. j) hex bolt M8 X 120

(3P) 、and (C. s) washer M8 (3P).

※ (C. 8) Be careful with the direction of

the alternator bracket.

③ Remove the A/C compressor by

removing the bolts (three bolts).

① Disconnect the connector from the A/C

compressor.

② Extend the A/C compressor harness by

connecting with the supplied A/C

(

56) harness.

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No parts of this manual may be

reproduced, stored in retrieval systems, or transmitted in any way without prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes