User`s manual

Blitzz Super G Wireless – 108 Mbps 802.11g Notebook Adapter
30
Profile Name The profile setting allows you to save different configurations for
different working environments. The “default” profile contains the initial
configuration setting when you install the card. You can create a new profile by
selecting New Entry from the Profile Name drop down box. The box will have a
blinking cursor in it for you to type in a new name. Perform all the necessary
wireless configuration changes, then click Apply Changes button to save the
change in profile and make the wireless connection. If you want to use an existing
profile, just select the profile from the dropdown list and click Activate button to
switch on the profile setting. To remove an existing profile, select the profile form
the dropdown list, then click “Remove” button to remove it.
Network Type The operating mode setting determines the architecture of your
wireless network. Select Ad-Hoc or Infrastructure mode depending on your
network type. The Ad-Hoc mode is used for simple peer to peer network. It allows
sharing of local resources between wireless cards without using a wireless Access
Point. The Infrastructure mode allows a wireless card to be integrated into an
existing network through an Access Point. Infrastructure network permits roaming
between Access Point while maintaining a connection to all network resources and
providing additional features, such as power saving and extended range.