User Manual

KONTROL 6 Manual Rev B.

Page 15

WARNING: AFTER STARTING FIRMWARE UPGRADE, DO NOT POWER DOWN

KONTROL 6 UNTIL THE UPGRADE FINISHES!!! UNPLUG ALL FIXTURES FROM

KONTROL 6 PRIOR TO PROCEEDING.

1. Turn the unit off.

2. With the unit off, press and hold the <EDIT/REC> & <LEFT> but-

tons.

3. Continue to hold the button combination until KONTROL 6’s LED dis-

play shows “UP--.”

4. Release the button combination, then press any button to proceed

with the upgrade.

5. Once upgrade is complete, KONTROL 6 will display the “OK” message

(ot) as indicated above.