Owner manual

Lucid DMX
III Quick start guide
There are two ways to patch a fixture into the address map. The first is to drag and drop a particular
profile from the list on the left into the address map. The second is to use the tools located at the
bottom left-hand area of the Patch Manager window.
Let us try to Drag and Drop, for example. Left click and hold the "Torrent F5" item on the list,
do not release the mouse click while moving the cursor over the address map. Release the mouse click
once you have chosen an appropriate DMX address.
You can modify the fixture's address whenever you want, just left click and hold on to the colored area
that represents the fixture on the address map, do not release the mouse button while moving the
cursor until you reach the desired address.
Continuing with our example, let us add more "Torrent F5" fixtures, except that now we will
not drag and drop the item from the list, but instead use the tools at the bottom-left hand area of the
window.
Select the "Torrent F5" item from the list. As you do this, the tools in the bottom left area
will become enabled. Select the First DMX channel for your new fixture, in this case we can select
17. Select the Number of fixtures that you want to add, we can select 3, for example. To add the
fixtures to the address map, click on the Patch button.
Page 10