Owner manual

Lucid DMX
V Playback tools
V Playback tools
1. 1. Cues and Sequences Playback
In live mode, the buttons represent the Cues and the Sequences of the show. The Cue button is bigger
than the sequence button.
The Loops for each sequence and cue can be setup. A circle arrow icon shows that the Loop is
enabled. When you have a number with the icon, it shows that you have defined a number of loops, if
you don't have a number, you'll have the "always loop" option.
To setup the loops, right click on the sequence or cue and select "Loop Options".
A new window appears. If you want the "Always loop" option just click OK. If you want a "Loop Count"
select Loop Count and put a number of loops. Click OK. With the time option, you can set a sequence
to loop for a specified period of time.
The Auto release option will release the control of the fixtures when the sequence has finished looping.
When disabled the fixtures will remain as they were in the final scene of the sequence.
With the BPM option you can set a sequence to ignore the timing of scenes and instead move to the
next scene based on BPM.
Set this sequence to loop 4 times and press OK.
Page 51